8 Port Fanless Gigabit Switch w/ Dual Fiber SFPs For Offices

Small, Yet Powerful Gigabit Smart Switch Packed with Advanced Features
Joining NETGEAR's ProSafe® family of Smart Switches with high performance and cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network.

The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber ports for uplinks with greater distance.

With PoE capability on all 8 copper ports, the GS110TP can automatically detect PoE on the end devices and dynamically manage power assignments and priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones and IP cameras, providing flexibility and ease of deployment to your network.

The GS110TP comes with full features like enhanced VLAN and QoS, access control lists (ACL), 802.1x port authentication, rate limiting and IGMP snooping and more to provide businesses with expandable networks while ensuring performance and reliability.

With a fanless compact form factor, the GS110TP offers silent operation suitable for deployments in any environment; especially in noise sensitive areas.

You also get the NETGEAR ProSafe Lifetime Warranty with 1 Year ProSupport 24x7 Advanced Technical Support.

PoE Power Management
GS110TP offers useful PoE power management features to help you better control and monitor your power resource.

The PoE timer can help turn off the PoE ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget.

Power will be assigned to the PoE ports dynamically depending on the actual power needed; so that you don't need any calculations. The PoE LED on the front panel will light up if the PoE usage is reaching the threshold, meaning that insufficient PoE resource is left for powering up additional ports.

NETGEAR Green

• Up to 70% power savings compared to the non-Green version
• Auto power-down mode saves energy when port is not in use
• Cable length detection reduces power usage when network cable is shorter than 10 meters

Advanced Quality of Service (QoS)
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts.

Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality.

The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The GS110TP provides an extensive set of QoS features:

• 802.1p-based prioritization
• Layer 3-based prioritization
• Rate limiting

Advanced Security
The GS110TP provides more robust security. This includes

• 802.1x for authentication
• ACL filtering to permit or deny traffic based on MAC or IP addresses

Usability Enhancements
The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhancements to help customers fully utilize the features for a more optimized and secure network. For example, the Auto Voice VLAN and Auto Video features will assist customers to easily set up VoIP or IP surveillance networks with a couple of simple steps.

You don't need to be an IT professional to set up VoIP or IP surveillance. Security is critical for business networks. However, not everyone knows how to set up a secure network. The ACL Wizards on the GS110TP will guide even naïve users through the setup of access control and address filtering.

Centralized Management via the New Smart Control Center
With multiple switches in the network, managing configurations on each switch and upgrading firmware becomes a big challenge. NETGEAR's Smart Control Center that comes with the GS110TP and many other Smart switch models can help make this task much easier and simpler.

The GS110TP can perform discovery of the switches on your network, push configuration and firmware updates to multiple selected switches at once, and can even schedule when the tasks should be performed.

Network Ports	8x 10/100/1000Mbps Auto Sensing ports 2x Gigabit SFP uplinks
Performance Specifications	Forwarding modes: Store-and-forward Bandwidth: 20 Gbps full duplex (10 ports) Network latency: Less than 4 µs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission Buffer memory: 512 KB embedded memory per unit Address database size: 4k media access control (MAC) addresses per system MTBF: 157,004 hours (~18 years) Acoustic noise: 0 dB
Status LEDs	Per RJ45 port: Link / Activity, Speed, PoE Status Per SFP port: Link / Speed Per device: Power, PoE Max
Administrative Switch Management	IEEE 802.1Q Static VLAN (64 groups, Static) Protected Ports IEEE 802.1p Class of Service (CoS) Port-based QoS DSCP-based QoS DiffServ IEEE802.3ad Link Aggregation (manual or LACP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Trees Protocol (RSTP) IEEE 802.1ab Link Layer Discovery Protocol (LLDP) SNMP v1, v2c, v3 RFC 1213 MIB II RFC 1643 Ethernet Interface MIB RFC 1493 Bridge MIB RMON group 1, 2, 3, 9 Auto Voice VLAN DHCP Filtering Auto denial-of-service (DoS) protection HTTP and HTTPS Ping and traceroute Power saving when link down RFC 2131 DHCP client IEEE 802.1x with Guest VLAN Jumbo frame support Port-based security by locked MAC addresses MAC and Ip-based ACL Storm control for broadcast, multicast and unknown unicast packets IGMP Snooping v1/v2 Port-based egress rate limiting SNTP Port Mirroring Support (Many to one) Web-based configuration Configuration Backup/Restore Password Access Control RADIUS Support TACACS+ and RADIUS support Syslog Firmware upgradeable PoE (46 watts of power budget)
Network Protocol and Standards	IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3x full-duplex flow control IEEE 802.3af (DTE Power Via MDI)
Certifications	CE mark, commercial C-Tick FCC Part 15 Class A VCCI Class A
Electromagnetic Immunity	EN 55024
Temperature	Operating: 0 ~ 50° C Storage: -20 ~ 70° C
Humidity	Operating: Up to 90% RH, non-condensing Storage: Up to 95% RH, non-condensing
Altitude	Operating & Storage: Up to 3,000m
Power	AC Power Adapter Output: 48Vdc @ 1.25A, 60W
Power Use	59.3W Maximum
Dimensions	101.6 x 236 x 27mm (4.0 x 9.3 x 1.1")
Weight	700g (1.55 lb)

• Netgear ProSafe® GS110TP-200NAS 8-port Gigabit PoE Smart Switch w/
• AC Power Adapter
• Rubber footpads
• Wallmount Kit
• Resource CD
• Installation Guide