This case has all the modern features (except cable routing grommets). Airflow is great. Component compatibility is very good. It was easy to build in, and i did not get cut by any sharp edges. And the biggest strength is the Price, you really can not find a better value option for a case that looks this good.

All the negatives are nitpicking things... Front light is only Blue (no RGB), front dust filter is not removable. Height restrictions will limit you from very tall tower coolers. And the biggest weakness is availability, its always sold out.

If your on a budget and you still want features and looks... BUY IT IF YOU CAN. It's always out of stock for good reason. There are better cases if you have money to burn, but the easiest justification for a better and more expensive case would be that the other case is in stock.

As stated in other reviews, there is excellent room for cable management. Impressed with a full psu shroud and tempered glass side panel, only a few cases in this price range seem to have those features. Replaceable GPU bracket covers on the back are nice too, instead of those breakaway ones. I didn't load up fans in this build but it seems as if the airflow would be decent.

This must be just an isolated incident, but the case I bought had a dead USB port on the front panel. The biggest weakness is the placement of the power button. Oh my, what a horrible spot. I must of turned it off 3-4 times as i was moving it around to test out the different USB ports.

If it wasn't for the placement of the power button, I would highly recommend this case a a good budget level case.

Tempered glass side panel, PSU shroud, removable dust filters, and it's pretty easy to build in. There was a surprising amount of room for cable management behind the side panel, and enough cut outs that it's possible to route things nicely. Despite the fairly cheap metal I never encountered any jagged edges.

The metal feels pretty flimsy (you get what you pay for) but it's not awful. I especially noticed it installing the PSU and GPU and it feels pretty easy to bend. Once everything is seated it's not bad. It has a decent number of cut outs for cable routing, but there are no grommets, and if you are installing a mATX board and trying to plug things in at the very top or bottom access is a little constrained.

I''ve spent more on cheap cases in the past, and this was by far and away the best value I've personally used in this price range. Overall it did exactly what I need for a price that fit in the budget I was targetting for this build. Even $30 or $40 more probably gets you a materially better case, but if you are on a tight budget this will fit the bill.

The pictures dont' show that the whole side of the case is one piece of tinted tempered glass. Quality and styling is very good for this case and looks and performs better than some cases costing twice as much. Mesh front and room for lots of fans in the front of the case makes this a great choice for an all air cooled rig. really easy to build in and plenty of room to hide cables

I had to really wedge the 140mm fan in that i added to the top and it presses against the edge of the motherboard. I would have like some more clearance. The LED strip is powered by molex which is a shame since i have nothing else in my build that needs molex and it would have been nice to leave off that cable and plug it into sata power. The front has a finer mesh which is basically a filter although not super fine. This is ok by me as i don't like restrictive filters but it doesn't look like it will be easy to fully clean it outside of blasting it with air as its held in with metal tabs which can be prone to breaking if bent to often. cooling performance wouldn't be that good if you didn't add fans and it only comes with a single exhaust.

Great deal. Good airflow if you add additional fans...