Ubiquiti UniFi Pro Max 48 PoE Switch w/ Etherlighting™, 4x SFP+ Ports, 720W PoE Budget
Product Info
Ubiquiti Pro Max 48-port, Layer 3 Etherlighting™ Switch
This USW-PRO-48-POE 48 Port PoE Switch is configurable for Gigabit Layer2 and Layer3 with auto-sensing 802.3at PoE+ and 802.3BT PoE++.
52x Etherlighting™ Ports
Every RJ45 and SFP+ port uses an integrated RGB LED to illuminate and indicate port location, speed / link operation, and native VLAN / network status.
Pair with UniFi Etherlighting Patch Cables for optimal brightness
16x 2.5GbE Ports + 32x 1Gb + 4x 10G SFP+ Ports
There are 16x PoE++ ports and 32x PoE+ RJ45 Ethernet ports that share a total 600W PoE Budget, and four 10G SFP+ ports offer faster uplink options.
Future Layer3 Functionality
Layer3 functionality will be included in a later software release.
Management Software
Requires UniFi Network Version 8.0.24 and later
Features
- 33mm Colour Touch Screen
Easy to use Interface makes common settings quick and easy to setup and change - 16x 2.5GbE RJ45 ports:
- 8x 2.5GbE PoE++ ports
- 8x 2.5GbE PoE+ ports
- 32x 1GbE RJ45 ports:
- 8x 1GbE PoE++ ports
- 24x 1GbE PoE+ ports
- 4x 10Gb SFP+ ports
- 720W Total PoE Budget
- DC Power Backup Ready
- Managed by UniFi Network 8.0.24 or later
Additional Information:
For Full Product Specifications Visit Manufacturer's Website
Compatibility
Specifications
| Make and Model | Ubiquiti Pro Max 48 PoE Switch |
|---|---|
| Part Number | USW-PRO-MAX-48-POE |
| Switch Type | Wired Managed Layer 3 Switch* * Layer3 functionality will be included in a later software release |
| Hardware | |
| Chassis Material | SGCC Steel |
| Management Interface | Ethernet In-Band |
| Display Screen | 1x 33mm Colour Touch Screen |
| Networking Interface | 16x 2.5/1GbE RJ45 ports 32x 1GbE RJ45 ports 4x 10G SFP+ ports Total Non-blocking Throughput: 112 Gbps Switching Capacity: 224 Gbps |
| PoE Ports | 16x PoE++ Ports: (up to 60W per port) 8x 2.5GbE PoE++ ports 8x 1GbE PoE++ ports 32x PoE+ Ports: (up to 30W per port) |
| Button | Factory Reset |
| LEDs | System Status RPS Status |
| Layer 2 Features | 802.1X control Device isolation with ACLs DHCP snooping / guarding Egress rate limit Flow control IGMP snooping Jumbo frames LACP port aggregation LLDP-MED MAC address blocking Multicast / broadcast rate limiting Port isolation Port mirroring Port restricted by MAC Proprietary loop protection Storm control STP / RSTP with priorities and port-level disable Voice VLAN |
| Layer 3 Features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Network isolation with ACLs Static routing between local networks * Layer3 functionality will be included in a later software release |
| Etherlighting™ | Ethernet Ports: Locating Native VLAN/Network Speed/link SFP+ Ports: |
| Environmentals | Temperature: Operating: -5 to 40° C Humidity: |
| Certifications | CE, FCC, IC |
| Power Supply | Internal AC/DC Power Supply, 820W AC Input: 100 ~ 240Vac, 50/60Hz DC Input: USP-RPS DC |
| Power Consumption | Maximum Power Consumption: 820W PoE Port Power Budget: 720W Switch Power: Up to 100W |
| Dimensions | 442 x 400 x 44mm |
| Weight | Switch w/ Brackets: 6.3kg Switch w/o Brackets: 6.2kg |
