MPG Gungnir 300R ARGB Airflow Mid-Tower Gaming Case w/ 4 Fans, Tempered Glass, Black
Product Info
MSI MPG GUNGNIR 300R AIRFLOW Gaming Case
MSI MPG Gungnir 300R Airflow is a mid tower black color cabinet which has E-ATX motherboard supported with RTX 40 series GPU and can be installed additional fan by attached fan bracket to enhance airflow.
Features
Amazing Air Flow Possibility
Installation is possible with up to 10 fans of varying sizes. It supports dual 360mm radiators at the top and front, and it has an 80mm gap at the top and front for Push- Pull installation.
RTX 40 Series Graphics Card Support
No matter the longer, thicker or heavier of the graphics card, It is fully supported vertical or horizontal installation, also reserved enough space to ensure cooling and cable bending.
Omnidirectional Graphics Card Stand
The graphics card stand can be adjusted in many ways to support different graphics card installation.
Switchable PCI-E Brackets
Vertical GPU bracket supports installation of graphics card vertically without installing extra bracket and also can install 2 x 60 mm fans in the same time.
Multiple-Function Cable Cover
The cable cover can be moved to support E-ATX motherboards and can be installed additional fan by attached fan bracket to enhance airflow.
User Friendly
The patented pending sliding HDD cache and GPU holder. MSI chassis also uses the push latches construction on the PCI-E bracket, side panel ,and multiple function cable cover.
1 to 6 ARGB-PWM Control Board
This fan control board supports up to 6 x PWM fans with ARGB function. Allow you to use the LED switch button to adjust the ARGB lighting intuitionally.
Specifications
| Make and Model | MSI MPG GUNGNIR 300R AIRFLOW Gaming Case |
|---|---|
| Part Number | MPG GUNGNIR 300R AIRFLOW |
| Color | Black |
| Form Factor | Mid-Tower |
| Motherboard Form Factor Support | E-ATX (up to 280 x 305 mm) ATX / M-ATX / ITX |
| I/O Ports | 2 x USB 3.2 Gen 1 Type-A 1 x USB 3.2 Gen 2x2 Type-C 1 x Audio-Out 1 x Mic-In 1 x Reset Button 1 x LED Switch Button |
| Drive Mount Supports | 6 x 2.5” 2 x 2.5”/3.5” |
| Expansions Slots | 7 |
| Maximum GPU | Length: GPU holder at right front: 360mm / 14.17 inches GPU holder at right rear: 340mm / 13.39 inches Height: Horizontal installed: Max. up to 142mm / 5.59 inches Vertical installed: Max. up to 150mm / 5.91 inches Thickness: Max. up to 80mm / 3.15 inches |
| Maximum CPU Cooler Height | 175mm / 6.9 inches |
| Power Supply Support | ATX |
| Maximum PSU Length | Above 220mm |
| Fan Size Support | Top: 3 x 120 mm / 2 x 140 mm Front: 3 x 120 mm / 3 x 140 mm Rear: 1 x 120 mm / 1 x 140 mm Side: NA PSU Shroud: 2x 120 mm Vertical GPU bracket: 2 x 60mm (thickness: 15mm) Cable Cover: 1 x 80mm / 1 x 120mm |
| Pre-Installed Fan Size | Front: 3 x 120 mm Rear: 1 x 120 mm |
| Pre-Installed Fan Type | Front: 3 x PWM ARGB Fan Rear: 1 x PWM ARGB Fan |
| Radiator Size Support | Top: 120 / 140 / 240 / 280 / 360 mm Front: 120 / 140 / 240 / 280 / 360 mm Rear: 120 / 140 mm Side: NA Bottom: NA |
| Dimensions (L x W x H) | 505 x 235 x 510 mm / 19.88" x 9.25" x 20.08" inches |
| Weight | 10.9 kg / 24.03 lbs |
