Lian Li Uni SL-Infinity 120 RGB 120mm Case Fan, Black
Introducing A New Look To 120mm PC Case Fans And A New Level Of Installation Simplicity And Lighting Effect Customizability
- 120mm Case Fan; 61.3CFM / 2.66mm H20 / 29dB(A) @ 2,100 rpm
- 40 LEDs in each Fan for bright colourful RGB lighting
- Only one cable is required for a cluster of fans
- Quick PIN connection to provide ease of installation
- L-Connect v3 Software App controls Fan Speed & LED Lighting
- Magnetic Fluid Dynamic Bearing for stability, durability & longevity
- Low noise level at high RPM
- Infinity Mirror Look all around
INFINITY MIRROR FAN
A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.
CENTERED INFINITY MIRROR ARGB
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
SIDE FRAME ARGB
Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.
ALUMINUM TRIM SURROUNDED INFINITY MIRROR
Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.
The SL-Infinity 120 features 10% performance optimizations compared to the SL120 for better airflow (61.3 CFM), higher static pressure (2.66 mm H2O), and a wider fan speed (0, 200 ~ 2100 rpm) at low noise levels: 29 dB(A).
The 2nd Gen UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.
DAISY CHAIN FAN
A pin-to-pad contact point passes signals & power through the fan cluster.
The interlocking key is now removable to improve compatibility with radiators.
REVERSIBLE CABLE MODULE
The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.
L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANS
Control and preview with precision the lighting effect of the SL-Infinity fans with the new L-Connect interface.
- Select lighting effect of blades / fan frame / both LED
- Set personalized color / brightness / speed / direction
ENDLESS LIGHTING EFFECTS
Similar to the AL fans, the L-Connect 3 Software can set the lighting effects of the SL-Infinity fans for both the fan blades and the fan frame inner edges separately, or go with pre-set combined lighting effects.
Set the fan blade and inner fan frame lighting modes individually to achieve a custom look.
Fan Blade & Center Infinity Mirror LED
Angle Fan Frame & Side Infinity Mirror LED
Fan Blade & Center Infinity Mirror + Angle Fan Frame & Side Infinity Mirror LED
Select the combining lighting mode:
INTELLIGENT START/ STOP FAN
Unique to the SL-Infinity fans, L-Connect 3 features a Start/ Stop mode to completely stop the fan when the CPU or GPU is running below your set temperature (the maximum 50°C), achieving minimal acoustic levels when the system is at low temperature.
SYNC FAN SPEED TO MOTHERBOARD
L-Connect 3 now offers an option to sync fan speed to the motherboard, also known as the PWM mode in the earlier L-Connect version.
Click to pass fan speed control to motherboard.
QUICK SYNC LIGHTING WITH UNI FAN SL/ AL AND STRIMER PLUS V1 / V2
The quick sync function saves time to synchronize all LIAN LI device lighting effects with one click. Moreover, synchronize all devices to the motherboard software with one click.
ONLY ONE CABLE
Combining both the power cable and the lighting cable into a single cable, the cable module uses a 7-pin connector to connect to the controller, efficiently reducing the number of cables cluttering the PC build.
Note: The single pack includes a cable module that features a 4-PIN PWM cable and a 3-PIN 5V ARGB cable to connect directly to the motherboard.
|Make and Model||LIAN LI UNI FAN SL-INF 120 RGB, 1 Pack|
|Rotational Speed||200 ~ 2,100 rpm|
|Airflow||Up to 61.3CFM / 104m3/hour @ 2,100 rpm|
|Static Pressure||2.66mm H2O|
|Acoustical Noise||29.0 dB(A)|
|Bearing Design||Magnetic Fluid Dynamic Bearing|
|LED Lighting||40 LEDs per Fan|
|Cabling||PWM: 1x 4-pin (12Vdc)
ARGB: 1x 3-pin (5Vdc)
|Power||Starting Voltage: 6Vdc
Locked Current: < 50mA
|Power Consumption||Maximum: 5.16W
FAN: 12Vdc @ 0.18A, 2.16W
LEDs: 5Vdc @ 0.6A, 3.0W
|Dimensions||120 x 122.1 x 25mm|