Ubiquiti airMAX NanoBeam AC Gen2 5GHz Bridge
airMAX® ac CPE with Dedicated Management Radio
Compact, UISP-ready, 5 GHz WiFi bridge with enhanced surge protection and an optimized radio and antenna for even better longevity and performance.
The sleek NanoBeam design with proprietary airMAX ac chipset and dedicated management WiFi for easy UISP mobile app support and fast setup. This airMAX ac CPE pivots on a ball joint for mounting and alignment flexibility.
- New Antenna Design with +6dBi Gain
- Improved Radio Design
- Improved Surge Protection
- Management WiFi Radio / UISP Mobile App
- Uniform Beamwidth Maximizes Noise Immunity
- Dedicated Wi-Fi Radio for Management
- airMAX ac Processor for Superior Performance
Improved Noise Immunity
The NanoBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Well Integrated Design
The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 5AC Gen 2 gets maximum gain out of the smallest footprint.
Providing high performance and an innovative form factor, the NanoBeam 5AC Gen 2 is versatile and cost‑effective to deploy.
airOS® 8 Software Compatible
airOS® 8 is the revolutionary operating system for Ubiquiti® airMAX ac products.
airMAX ac Technology
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class.
- Intelligent QoS Priority assigned to voice/video for seamless streaming
- Scalability High capacity and scalability
- Long Distance Capable of high-speed, carrier-class links
The next-generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti’s airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
This airMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX.
With their use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mbps real TCP/IP throughput – up to triple the throughput of standard airMAX products.
The NanoBeam 5AC Gen 2 features airMAX ac technology and enhanced protection against ESD events.
Ease of Installation
- Quick Installation:
No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall‑mounting
- Convenient Alignment:
The NanoBeam 5AC Gen 2 pivots on its ball joint 3‑axis mount for easy aiming
Innovative Mechanical Design
- Efficient Footprint:
The radio and antenna are combined into a single body that takes up less space. The form factor has the highest gain for its size
The NanoBeam 5AC Gen 2 is small enough to blend discreetly into the background at a customer's location
- Versatile Mounting:
The NanoBeam 5AC Gen 2 can be mounted in almost any position needed for line of sight
|Make and Model||Ubiquiti airMAX NanoBeam AC Gen2 5GHz Bridge|
|Processor||Atheros MIPS 74Kc, 720MHz|
Worldwide: 2412 ~ 2472 MHz
USA: 2412 ~ 2462 MHz
|Interface||1x 10/100/1000 Main Ethernet port
1x 10/100/1000 Secondary Ethernet Port (PoE Passthrough)
Wi-Fi for Management
|LED Indicator||Power LED
4x Signal Strength LEDs*
* Signal Strength LEDs are Software Adjustable to Correspond to Custom RSSI Levels
|Mounting||Pole-mount (Kit Included)
|Enclosure||Outdoor UV Stabilized Plastic|
|Wind Loading||45.4N @ 200 km/h (10.2 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|Environmentals||Temperature Operating: -40 ~ 80°C (-40 ~ 176°F)
Humidity Operating: 5 ~ 95%, non-condensing
|ESD/EMP Protection||Air: ±24kV, Contact: ±24kV|
|Certifications||CE, FCC, IC|
|Salt Fog Test||IEC 68‑2‑11 (ASTM B117), Equivalent: MIL‑STD‑810 G Method 509.5|
|Vibration Test||IEC 68-2-6|
|Temperature Shock Test||IEC 68-2-14|
|UV Test||IEC 68-2-5 at 40° C / 104° F, Equivalent: ETS 300 019-1-4|
|Wind Driven Rain Test||ETS 300 019‑1‑4, Equivalent: MIL‑STD‑810 G Method 506.5|
|Power Supply||External PoE Adapter:
Input: 24Vdc @ 0.5A, 12W
Passive PoE: (Pairs 4, 5+; 7,8 Return)
|Power Consumption||Operating: 8W Typical|
|Dimensions||189 x 189 x 125mm|