EKWB EK-Quantum Vector² D-RGB Water Block, Black Nickel + Plexi For Strix RTX 3080 / 3080 Ti / 3090 Graphics Cards
Product Info
EK-Quantum Vector² Strix RTX 3080 / 3080 Ti / 3090 D-RGB - Nickel + Plexi
High-Performance GPU Liquid Cooling For NVidia Strix RTX 3080 / 3080 Ti / 3090 Cards
The New Vector² water blocks effortlessly solve the issue of excessive heat generation, during high load, on both the GPU core, voltage regulation module, and the GDDR6X VRAM of the ROG Strix RTX 3080, 3080 Ti, and 3090 Graphic Cards.
Custom Backplate Included!
For the first time, a full coverage black backplate is included with the GPU water block. Its distinctive L-shaped profile encloses the entire GPU while, at the same time, increasing the cooling surface area. The backplate also comes with pre-installed captive backplate screws that simplify the installation. They ensure that the correct size screw is always used where it is needed.
Note: As a result of the Custom Design, all Factory Backplates are not compatible with this EKWB Water Block!
Features
Technical and Visual Master Piece
The new look of the next-gen water blocks is dominated by minimalistic straight lines. A 10mm thick copper cold plate is used for all Vector² GPU water blocks. For Plexi versions, D-RGB Lighting is now deployed on the longest edge of the water block for improved fidelity and brightness from every viewing angle. The LED PCB is concealed inside a clean aluminum extrusion.
EK-Matrix7 Support: Easier Loop Assembly and Straighter Lines
Matrix7 standardizes the dimensions of the products, including the port position and spacing, making liquid cooling loop assembly more intuitive and easier. EK-Quantum Vector² GPU cooling enclosures follow the EK-Matrix7 standard, making them seamlessly integrate with EK-Quantum Reflection² distribution plates. This brings compatibility with the EK vertical GPU mount l perfect alignment of ports in both horizontal and vertical positions, meaning less time used for planning of the loop, bending tubes, and the end result will still be an epic build.
New Cooling Engine: Better Cooling In Every Scenario
The Vector water block actively cools the GPU, VRAM (on the front), power stages, and chokes in the VRM (voltage regulation module), and passively the PCB hotspots that are found on the backside of the GPU core, and the VRM (voltage regulation module). On the RTX 3090, the VRAM located on the backside is passively cooled, while the RTX 3080 gets cooling for the PCB located around the front-mounted VRAM.
The implemented 3rd-generation Vector cooling engine uses a novel 3D machined acrylic insert to improve flow distribution and thermal performance. This new cooling engine is based on an Open Split-Flow design, but the asymmetric shape of the jet insert helps distribute an even flow between the first and last copper fins.
The fin structure geometry has been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. It is also characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance.
Finally, great care was taken to achieve a symmetrical flow domain by utilizing an internal bridge to secondary components. This was done to ensure the cooling of secondary components without sacrificing flow distribution over the GPU core.
Rotatable Magnetic Covers
Sleek magnetic covers are used to conceal the terminal screws, which allows rotating the branding when the GPU water block and active backplate enclosure is inverted in the case, or being used on a vertical GPU mount.
Premium Materials and Clever Engineering for Longevity and Top Performance
All Vector² GPU water blocks use a thick 10mm copper coldplate with an acetal terminal attached directly to it to create a robust assembly.
A single O-ring design is used to create a seal between the cold plate and the water block top, reducing the number of failure points. This also means that you have seen the end of stainless steel bridge plates that were utilized on GPU water blocks before. This simple construction provides confidence during customization and maintenance. Tactile magnetic covers are used to conceal the terminal screws, which allows rotating the branding when the GPU is inverted in the case.
The cold plate is CNC-machined out of high-quality, pure electrolytic copper which is then nickel-plated, while its top is CNC-machined out of glass-like cast acrylic. The black anodized backplate has a new L-shaped profile that touches the base of the water block and encloses the entire GPU while increasing the cooling surface leading to even better performance.
Addressable D-RGB Compatibility
EKWB has used Addressable D-RGB LED lighting, deploying them on the longest edge of the water block for improved uniformity and brightness. The PCB and diodes are concealed inside a clean aluminum extrusion. The individually addressable RGB LED is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Pinout: +5V | Data | Blocked | Ground.
Vector² Water Blocks Won an iF Design Award
EK’s premium water blocks from the Quantum Vector² product line boast an iF Design Awards for 2022. These prestigious awards signify top-tier design levels delivered by our products to both consumers and the design community. Not only do Vector² water blocks have aesthetically pleasing looks to deserve these awards, but they also bring patent-pending technologies and valuable features to the table.
Important Installation Notes From EKWB:
- This water block is not compatible with NVLink and NVIDIA SLI
- Due to an immense variety of fittings / barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website
- Factory backplates are not compatible with this water block!
- This product should NOT be installed with any aluminum Fluid Gaming parts!
- The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel-plated water block! EK is offering a selection of such products in the coolants section
- Only compatible with Active Backplate in a Nickel + Plexi finish due to D-RGB implementation
Compatibility
ASUS STRIX RTX Compatibility List
The EK-Quantum Vector² Strix RTX 3080 / 3080 Ti / 3090 D-RGB - Nickel + Plexi GPU water block + backplate set is only compatible with:
- ROG Strix RTX 3090
- ROG Strix RTX 3080 Ti
- ROG Strix RTX 3080
Specifications
Product | EK-Quantum Vector² Strix RTX 3080 / 3080 Ti / 3090 D-RGB - Nickel + Plexi Edition |
---|---|
EAN | 3831109891315 |
Colour | Black |
GPU Card Compatibility | By design, this water block only supports the ASUS STRIX RTX 3080 / 3080 Ti / 3090 Series Graphics Cards. |
Materials | Cold Plate: Nickel Plated 99.99% Electrolytic Copper Top Piece: Plexiglass |
Port Threads | G1/4" |
Thermal Grease | Thermal Grease EK-TIM Ectotherm Tube, 1g |
Material Compatibility | Do Not Use With ANY Aluminum Parts: Only mix with other Copper / Brass Products |
LED Lighting | 15x Integrated D-RGB (ARGB) LEDs |
Dimensions | Water Block: 307.5 x 155 x 27mm |
Weight | N/A |
Package Contents
- 1x EK-Quantum Vector² Strix RTX 3080/90 D-RGB series high-performance Water Block
- 1x EK-Quantum Vector² Strix RTX 3080/90 Backplate
- 1x Mounting mechanism with screw-in brass standoffs
- 1x Mounting Assessory Kit w/ screws, nuts, and washers, etc.
- 2x Nickel plated brass plugs, G1/4"
- 1x EK-Loop Multi Allen Key (6mm / 8mm / 9mm)
- 1x Thermal Pad Set
- 1x Thermal Grease EK-TIM Ectotherm 1g Tube
- 1x Thermal Pad installation Quick Start Guide