Fractal Design Vector RS Tempered Glass ARGB E-ATX Case, Blackout Dark

MX79122 Vector RS Tempered Glass ARGB E-ATX Case, Blackout Dark
MX79122 Vector RS Tempered Glass ARGB E-ATX Case, Blackout Dark MX79122 Vector RS Tempered Glass ARGB E-ATX Case, Blackout Dark MX79122 Vector RS Tempered Glass ARGB E-ATX Case, Blackout Dark MX79122 Vector RS Tempered Glass ARGB E-ATX Case, Blackout Dark

Product Info

feature

Vector RS Dark Tempered Glass – Command Attention

With customizable effects, adaptable layout, and interchangeable elements, Vector becomes what you want it to be: The perfect showcase for your system.

Sharp angles, uncompromising design and a no-nonsense attitude combine to create a case quite unlike any other. Just look at the expressive ARGB strip or the counter-angled air intakes designed to trap noise without restricting airflow, giving you a case that breathes like it’s open - but sounds like it’s closed.

But looks only go so far. What about the inside? Storage is a non-issue - with eleven HDD and four SSD positions (six + two brackets included), the Vector RS is ready to take on any build you want to throw at it. An intelligent modular layout adapts to maximize airflow, water-cooling, and component headroom to realize every ounce of potential in your build. The TG top panel easily swaps with the included ventilated steel cooling bracket to shift Vector’s affinity from ultimate display piece to performance powerhouse with nine total fan positions.

With customizable effects, adaptable layout, and interchangeable elements, Vector becomes what you want it to be: The perfect showcase for your system.

  • Tinted, bolt-free tempered glass on three sides
  • Top panel easily converts between tempered glass and filtered ventilation
  • Counter-angled vents designed to trap noise with minimal airflow resistance
  • Nine fan positions with intuitive layout and clear airflow paths offer massive cooling capacity
  • Interchangeable top panel easily converts between tempered glass and filtered ventilation
  • Customizable ARGB LED effects wrapping the top and front panels in a synchronized, continuous span
  • Set colors and effects via standard 5V RGB motherboard connection or included Adjust R1 controller
  • Six HDD and two SSD mounts included with a total of 11 HDD and 4 SSD positions (additional Type A brackets sold separately)
  • Three pre-installed Fractal Design Dynamic X2 GP-14 140 mm fans for optimal airflow
  • Up to nine fan positions with clear airflow paths for maximum cooling capacity
  • Extensive water cooling support with room for radiators up to 420 mm in the top, 360 mm up front and 280 mm in the base
  • Ventilated PSU shroud conceals cables and provides additional SSD mounting options
  • Modular design easily converts from a storage-focused standard layout to a cooling-centric open layout
  • Nexus+ fan hub manages up to nine fans via your motherboard
  • USB 3.1 Gen 2 Type-C™ with fast charging support and speeds up to 10Gbps

Features

Attractive Aesthetics

  • Tinted, bolt-free tempered glass on three sides
  • Top panel easily converts between tempered glass and filtered ventilation
  • Customizable ARGB LED effects wrapping top and front panels in a synchronized span
  • Control via standard 5V RGB motherboard connection or included Adjust R1 controller
  • Compatible with standard 5V RGB motherboard connectors and software
  • Push-to-lock latching for quick side panel access on both sides

Extensive Water-cooling Support

The Vector RS is designed to offer you a wide range of options for your water-cooling setup.

  • Front radiator: Up to 360/280 mm
  • Top radiator: Up to 360/420 mm (with cooling bracket installed)
  • Rear radiator: 120 mm
  • Bottom radiator: Up to 240/280 mm

Vertically Inclined

Vertical 2.5 slot GPU support via Flex vertical PCIe riser (sold separately)

Full Speed Ahead

USB 3.1 Gen 2 Type-C™ with fast charging support and speeds up to 10Gbps

Conceal and Expand

Ventilated PSU shroud conceals cables and provides additional SSD mounting options

Dual Layout Design

Converting between Open and Storage layout is both fast and easy, ensuring you always get the very most out of your Vector RS.

  • Six HDD and two SSD mounts included with a total of 11 HDD and 4 SSD positions (additional Type A brackets sold separately)
  • Modular design easily converts from a storage-focused standard layout to a cooling-centric open layout
  • Six vibration damped 3.5" HDD trays and two 2.5" SSD brackets included
  • Universal HDD/SSD trays can be independently repositioned to suit your configuration

A New Cooling Angle

Thanks to the counter-angled intake vents, the Vector RS is a case that can breathe like it's open, but sound like it's closed.

  • Designed to trap noise with minimal airflow resistance
  • Three pre-installed Fractal Design Dynamic X2 GP-14 140 mm fans for optimal airflow
  • Up to nine fan positions with clear airflow paths for maximum cooling capacity
  • Nexus+ fan hub manages up to nine fans via your motherboard
  • High-density industrial sound damping bitumen on the right-hand side panel
  • Easy-to-clean high-airflow nylon filters on the front, top and base

Additional Information:

Visit the Manufacturer Product Web Page for Full Details

Download the Manufacturer Product Sheet

Specifications

Product Vector RS Series Tempered Glass E-ATX Case
Part Number
FD-C-VER1A-02
Color Blackout Dark
   
Chassis Type E-ATX
Material Steel, Sound-dampening material, Dark tint tempered glass
Motherboard E-ATX (up to 285mm), ATX, Micro ATX and ITX
   
Expansion Slots 7 + 2 vertical
Drive Bays 3.5" / 2.5": 6 included, 11 positions total
2.5": 2 included, 4 positions total
   
Maximum GPU Length 440mm (with front fan installed)
Maximum CPU Cooler Height 185mm
Maximum PSU Length 300mm
Cable Routing Space 23mm
Cable Management Velcro straps included for easy cable management
   
Fan Mount Locations Front: 3 x 120mm or 3 x 140mm
Top: 3 x 120mm or 3 x 140mm (with cooling bracket included)
Bottom: 2 x 120/140mm
Rear: 1 x 120/140mm

Includes:
2 x front-mounted Fractal Design Dynamic X2 GP-14 fans
1 x rear-mounted Fractal Design Dynamic X2 GP-14 fan

Fan Filters Dust filters on front, top, bottom, and PSU intakes
   
Radiator Mount Locations Front: 120/240/360 mm or 140/280 mm
Top: 120/240/360 mm or 140/280/420 mm (max 35 mm motherboard component height)
Bottom: 120/240 mm or 140/280 mm
Rear: 120 mm
   
Front I/O 1 x USB 3.1 Gen 2 Type-C
2 x USB 3.0 ports
1 x Audio in/out
Power button
Reset button
   
Power Supply ATX PSU (not included)
   
Dimensions (LxWxH) 540 x 233 x 475 mm (without feet/protrusions/screws)
552 x 233 x 498 mm
Weight 12.64 kg

Package Contents

  • Fractal Design Vector RS - Blackout TG E-ATX Case, Blackout Dark
  • Ventilated Top Panel
  • Top Filter
  • Top Radiator/Fan Bracket
  • Adjust R1 RGB Controller
  • Accessory Box
  • User Manual