Ethernet Surge Protector
Ethernet to Ethernet Grounded ESD Protection
The ETH-SP is engineered to protect any Power‑over‑Ethernet (PoE)
or non‑PoE device with connection speeds of up to 1 Gbps.
ESD Protection for Outdoor PoE Devices
Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.
Additional ESD Protection
All Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP adds another layer of protection to your outdoor, high-speed network.
Plug and Play Installation
Connect the ground and Ethernet cables in between your network devices.
- Cost-effective solution for protecting
devices from damaging electrostatic discharge and surges
- Designed for easy, plug and play installation
- Compatible with 10/100/1000 Mbps Networks
|Make and Model||Ubiquiti Ethernet Surge Protector|
|Interface Connections||(2) RJ45 Female Connectors|
|ESD/EMP Protection||Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs||DC Spark-Over Voltage||90V @ 100V/s|
|Maximum Impulse Spark-Over Voltage||700V @ 1kV/µs|
|Maximum Insulation Resistance||1G ohm @ 50V|
|Maximum Capacitance||1.0 pF @ 1 MHz|
|Data Line Protection||RJ45 10/100/1000 Ethernet|
|IEEE 802.3af PoE Support||Yes|
|Shock and Vibration Certification||ETSI300-019-1.4 Standard|
|Operating Temperature||-30 to 65° C (-22 to 149° F)|
|Operating Humidity||10 to 90% Noncondensing|
|Dimensions and Weight|
|Dimensions||91 x 61 x 32.5 mm|
- Ubiquiti Ethernet Surge Protector