Ubiquiti UniFi XG Dual Band Access Point, 802.11ac-wave 2, MIMO 4x4, 802.3br PoE 60W Injector
Product Info
Ubiquiti UniFi XG Series Access Points:
The Highest Capacity, Highest Performing WiFi APs in the World!
- Quad-Radio 802.11ac Wave 2 Access Point w/ Dedicated Security Radio
- Simultaneous Tri-Band 4x4 Multi-User MIMO Low Latency QoS
- Real-Time Spectrum and airTime Utilization Engine
- Dedicated Security Radio with Persistent 24/7 Threat Management
- Real Aggregate Throughput: 4.2 Gbps
- Capacity for Big Crowds: Up to 1,500 Clients
- RJ45 Ethernet Port supports 10 Gigabit Ethernet

High Density Tests Conducted by Alethea Communications Technologies w/ 100 Clients:

(High Density Tests conducted on Access Points where done in a high density environment with 100 WiFi clients running the test concurrently.)
Features
Create a Future-Proof 10 Gigabit End-to-End UniFi Network

Spectral Security
The UniFi WiFi AP delivers unprecedented wireless awareness and security, including tools for real-time spectrum monitoring, airtime utilization analytics, and intrusion detection/prevention. Using a persistent spectral scan, the AP constantly monitors the RF environment to check for both potential malicious activity and the best channel for network performance.

Advanced Features in UniFi Controllers
Featuring an intuitive user interface, the UniFi Controller conducts device discovery, provisioning, monitoring, and configuration for centralized control of UniFi devices.

Additional Information:
Visit the Manufacturer Product Web Page for Full Details
Compatibility
Outdoor Installation Requirements
NOTE: The UAP-XG may be installed outdoors under an eave or other protected location. Do not install the UAP-XG in an open environment.
Operating Temperature: -10 ~ 60° C
Operating Humidity: 5 ~ 95%, Non-Condensing
- Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling
- Cable feed opening must be directed away from the open environment
- Cable feed must be pointed downwards when wall-mounted
- Shielded Category 6 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE
System Requirements
- Operating Systems:
- Microsoft Windows® 10, 8.x or 7
- Mac OS X
- Linux
- Web Browser:
- Google Chrome (Other browsers may suffer from limited functionality)
- Java Runtime Environment v1.8+
- UniFi Controller Software v5.7 or higher
Specifications
Make and Model | Ubiquiti UAP-XG Remote Wireless Access Point |
---|---|
Part Number | UAP-XG-AP |
WiFi Support | IEEE 802.11 a/b/g/n/ac/ac-wave2 |
Wi-Fi Channels | Dual Band: 2.4 & 5 GHz |
Transmission Rates | 2.4 GHz: 800Mbps 5GHz: 1.7Gbps |
Wireless Security | WEP WPA-PSK WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Antenna | Integrated MIMO 4x4 Dual Band Internal Antenna |
Antenna Gain | 2.4 GHz: 6.0 dBi 5 GHz: 8.0 dBi |
Transmission Power | 2.4 GHz: 25 dBm 5 GHz: 25 dBm |
Port | 1x RJ45 Gigabit Ethernet port 1x ICM 10/1 Gigabit Ethernet port |
Temperature | Operating: -10 ~ +60° C |
Humidity | 5 ~ 95%, Non-Condensing |
Installations | Supports correct Indoors and Outside Installations Indoors: Wall, Ceiling and Junction Box Installations supported Outdoors: Installation under an Eave or other protected location supported (See the Quick Start Guide for correct Indoor and Outside installation details) |
Certificates | CE, FCC, IC |
Power | Uses PoE 802.3bt Wired Connection Input: 50Vdc Power Consumption: Up to 31W |
PoE Injector | Ubiquiti 802.3bt PoE Pass Through Power Injector Included Output: 50Vdc @ 1.2A, 60W |
Dimensions | 228 x 228 x 50mm |
Weight | 1.3kg |
Package Contents
- 1x Ubiquiti UAP-XG Wireless AC Access Point
- 1x 802.3bt PoE Pass Through Power Injector (50Vdc @ 1.2A, 60W)
- 1x AC Power Cord
- 1x Ubiquiti UAP-XG Hardware Mounting Kit:
- 1x UAP-XG Mounting Plate
- 1x UAP-XG Ceiling Backing Plate
- 4x Ceiling Screws
- 4x Keps Nuts
- 2x T-Bar Mounts
- 2x T-Bar Screws
- 1x Allen Wrench
- 4x Wall Screws
- 4x Screw Anchors
- 1x Release Tool
- 1x Cable Feed Plug