Full Motion TV Mount
The PDX650 from Kanto is a full motion TV wall mount that allows your flat screen TV to sit 2″ from the wall. Its generous tilt and swivel capabilities are complemented by 21.8" of extension, making it easy to place your TV in the most optimal position. Exceptionally strong yet lightweight enough to make installation a breeze, this TV wall mount will ensure your TV remains safe and secure. Available in black and white finishes.
- Fit most flat panel TVs from 37"~75"
- Support TVs up to Max weight of 125 lbs (57 kg)
- Accommodates VESA sizes from 100x100 to 600x400
- Extends 2"~21.8" (5cm~55.3cm) from the wall
- Swivels 80° in either direction, depending on screen size
- Integrated cable management
- Adjustable horizontal leveling
The PDX650 from Kanto is a full motion TV wall mount that allows your flat screen TV to sit a mere 2" from the wall.
Low Profile Design
With a unique tilt head designed to nestle into the frame, the PDX650 TV wall mount will let you push your flat screen TV within 2" of the wall. The H frame assembly provides maximum access for cable connections.
Fits VESA Sizes to 600 x 400
With its adjustable bracket arms, the PDX650 accommodates VESA sizes from 100×100 to 600×400.
Extends Almost 22 Inches
Even with its low-profile design the PDX650 can extend almost 22" from the wall, giving you plenty of room for tilting and swivelling your TV, or for reaching out from alcoves.
Supports 125 Pounds
With its solid steel construction, this durable TV wall mount is designed and tested to hold up to 125 pounds. Even at maximum weight and full extension, your TV will remain in place with no sag.
Swivels 80 Degrees in Either Direction
The articulating arms allow you to pivot your TV up to 80° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.
The accessible tilt mechanism makes it easy to angle your TV up to 15° forward or 3° backward. Once you've found the best viewing angle, tighten the nuts to secure your TV in place.
Sleek Cable Management
Four cable management raceways are attached to the bottom of the wishbone arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides - whatever works best.
Everything You Need
We supply you with everything except a toolbox to ensure that your installation goes smoothly. Instruction manuals are provided in English, French, and Spanish, as well as the parts you need to mount your TV safely and securely. Easy-to-follow online videos and phone support are available to assist you along the way.
Convenient Bolt Pack
The PDX650 includes a labeled bolt pack with a variety of bolt diameters and lengths, as well as several spacers to allow a custom fit. Lag bolts and concrete anchors are provided so you can mount to wood studs and concrete walls.
|Product||Full Motion TV Wall Mount|
|# of Displays Supported||1|
|Display Size||37" ~ 75"|
|Weight Capacity||125 lbs (57kg)|
|Tilt||+15 to -3°|
|Swivel||80° of swivel in either direction, dependent on screen size|
|Extension||21.8" (55.3 cm) from the wall|
|Profile||Sits 2" (5 cm) from the wall|
|VESA Compatibility||From 200x100 to 600x400|
|Materials||Solid steel with durable powder coated finish Integrated cable management|
|Weight||22.5 lbs (10.2kg)|
- Kanto PDX650 Full Motion TV Wall Mount, White
- Mounting Hardware
- Paper Wall Template for Marking Pilot Holes
- Installation Manual