Force Series Gen.4 PCIe MP600 1TB NVMe M.2 SSD
The CORSAIR Force MP600 Gen4 PCIe x4 NVMe M.2 SSD uses Gen4 PCIe technology with blazing fast sequential read speeds of up to 4,950MB/s and sequential write speeds of up to 4,250MB/s. High-density 3D TLC NAND flash memory provides an ideal mix of performance, endurance, and value, with longevity up to 1,800TB Written. Contained in an industry-standard M.2 2280 form factor and connecting using a high-speed NVMe PCIe Gen4 x4 M.2 interface, the MP600 is easy to install into a compatible motherboard and is backed by a five-year warranty. If you’re looking for extreme storage performance, go with Gen4 for blazing fast speed.
PCIe 4.0 (GEN4) TECHNOLOGY
As a PCIe 4.0 SSD, the MP600 delivers incredible storage performance, delivering up to 10 times the sequential read and sequential write speeds of some SATA SSDs and up to 50 times the speed of some traditional HDDs. The MP600 is also fully backwards compatible with current PCIe 3.0 platforms
DISCLAIMER: Performance may vary based on system hardware and configuration.
LOWER TEMPERATURES, HIGHER PERFORMANCE
The MP600 is equipped with a high surface area aluminum heatsink, helping to maintain its performance even under heavy load.
HIGH-DENSITY 3D TLC NAND MEMORY
Provides an ideal mix of performance, endurance, and value to keep your drive performing at its best for years, with outstanding longevity up to 1,800TB Written*.
*Endurance varies by capacity.
M.2 2280 Form Factor
Easily fits directly into your new AMD X570 chipset-based motherboard, freeing up drive space in your PC to provide better airflow and easier cable routing.
READY FOR RYZEN
CORSAIR is a proud launch partner for AMD's 3rd generation of Ryzen processors. The MP600 is engineered to help you get the full benefit of PCIe 4.0 speed right out of the gate with your new Ryzen-based PC.
COMPREHENSIVE FIVE-YEAR WARRANTY
Long-term reliability and industry-leading customer support for peace of mind.
|Device Type||Gen4 PCIe x4 NVMe M.2 2280 Solid State Drive|
|NAND Type||3D TLC|
|Interface||Gen4 PCIe x4 NVMe|
|Form Factor||M.2 2280|
|Data Transfers (CDM)||Maximum Sequential Reads: 4,950MB/s
Maximum Sequential Writes: 4,250MB/s
|IOPS||IOPS (IOMETER QD32)
Max Random Reads: Up to 680k IOPS
Max Random Writes: Up to 600k IOPS
|Bad Block Management||Yes|
|Static and Dynamic Leveling||Yes|
|Encryption Support||AES 256-bit Encryption|
|Power Consumption|| Idle: 1.1W
Active Read: 6.5W
Active Write: 6.5W
|DEVSLP||PS4 < 1.65mW|
|Temperature|| Operating: 0°C to +70°C
Storage: -40°C to +85°C
|Humidity|| Operating: 90% RH (40° C)
Storage: 93% RH (40° C)
|Vibration||20Hz~80Hz / 1.52mm, 80Hz~2000Hz / 20G|
|Dimensions||80mm x 23mm x 15 mm / 3.15" x 0.91" x 0.59"|
|Weight||34.0g / 0.075 lb|
- Force MP600 Series M.2 SSD with heatsink