Thermaltake Water 3.0 360 ARGB Sync Edition - Release the Full CPU Horsepower
Thermaltake Water 3.0 360 ARGB Sync Edition comes with three 120 mm fan with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy better cooling performance and greater CPU protection!
- All-in-one cooling solution that is completely self-contained. No filling, no maintenance. Just plug and play
- Software Enabled functions for RGB LED, Fan Speed and Brightness
- Equipped with an ARGB LED Ring on the pump and ARGB radiator fans, lighting effects can be synchronized with select ASUS, GIGABYTE, MSI, and AsRock 5V RGB header motherboards and controlled via motherboard RGB software
- High performance copper base plate design accelerates heat conductivity for water block and pump
- Large surface radiator increases cooling and provides exceptional heat dissipation
- Select from 16.8 million colors, bringing the right atmosphere to any system theme
- Easy installation with maintenance-free operation
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Pure 12 ARGB Sync Radiator Fan
Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.
* Caution: the motherboard signal connector only supports 5V header.
Switch LED Modes with ARGB Controller
The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options.
* The maximum signal output for one controller is 90 addressable LEDs.
High Efficiency Radiator
Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.
High Performance Waterblock
The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.
High Quality Pump
The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
For use with the following Processor Sockets:
- AMD: FM2 / FM1 / AM4 / AM3+ / AM3/ AM2+ / AM2
- Intel: LGA 2066 / 2011-3 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150
|Make and Model||Water 3.0 ARGB Sync Radiator Liquid CPU Cooler w/ RGB LED Fan|
|Type||Liquid cooling system|
|Fan Size||120 x 120 x 25 mm|
|Fan Type||Hydraulic Bearing|
|Speed||500 ~ 1,500 RPM|
|Static Pressure||1.59 mmH2O|
|Noise Level||25.8 dBA|
||12V / 5V|
|Power Input||1.44W / 1.6W|
|Lighting||LED Control: ARGB controller or 5V addressable RGB header on motherboard
w/ 16.8 million colors
||12V / 5V|
|Power Input||3.9W / 1.06W|
|Dimensions||Fan: 3x 120x120x25 mm fans
Radiator: 394 x 120 x 27 mm
Tube Length: 400mm