FiberPoE Gen 2 – Optical Data Transport for Outdoor PoE Devices
The FiberPoE™ connects remote PoE devices and provides data and power using fiber and DC cabling.
Overcome PoE limitations with the next-generation FiberPoE™, modelF-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.
- Reliable long-distance Gigabit PoE runs
- Enhanced ESD Protection and EMI reduction
- Dependable 24V/50V passive PoE transport
The FiberPoE™ provides fiber connectivity to any PoE device.
Designed for Outdoor Durability
The FiberPoE™ features an outdoor weatherproof form factor with integrated strain relief management.
The FiberPoE™ allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power.
Separate Data and Power Transport
PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE™ Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.
The FiberPoE™ Gen 2 provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE™ Gen 2 device as an Fiber-to-Ethernet Converter, or a pair of FiberPoE™ Gen 2 devices to create a Fiber Bridge.
Enhanced Surge Protection
Featuring a built-in high-current Gas Discharge Tube (GDT ) for the DC terminal block and PoE port, the FiberPoE™ Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.
Fiber Optic Data Transport
Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable.
The FiberPoE™ Gen 2 supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
Integrated Fiber Cable Strain Relief
An integrated strain relief system was thoughtfully designed to fit inside the FiberPoE™ Gen 2 cover for added protection and a cleaner installation
|Product||FiberPoE Gen 2 Optical Data Transport|
|Interface||1 x 1 Gbps SFP port
1 x 1000 Mbps Ethernet PoE port
1 x DC RJ45 port DC injection
1 x DC terminal block
|Surge Protection||Built-in high-current gas discharge tube for DC terminal block and PoE port|
|ESD/EMP Protection||± 24kV Contact / Air for Ethernet|
|LED Indicator||White: Power On
Blue (Flashing): Activity
1. DC Terminal Block, 2-Wire, 24VDC or 50VDCSupported (Supported voltage range: 44 to 57VDC)
2. DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough
3. PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
|Input DC Voltage||16 to 57V|
|PoE Output||PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or4-Pair (24VDC or 50VDC) PoE|
|DC Output||Terminal Block, 2-Wire (24VDC or 50VDC)|
|Power Consumption||1.5W (typical)|
|Operating Temperature||-40 ~ 60°C (-40 ~ 140°F)|
|Operating Humidity||10 ~ 95%, non-condensing|
|Certifications||CE, FCC, IC|
|Dimensions||196.4 x 93.5 x 32.4 mm (7.73" x 3.68" x 1.28")|
- Ubiquiti FiberPoE Gen 2 Optical Data Transport
- Self-Tapping Screw
- 2 x Metal Straps
- Quick Start Guide