APC Back-UPS Pro 1000S, 1000VA w/ 10 Surge Outlets, 2 USB Charging Ports

MX73316 Back-UPS Pro 1000S, 1000VA w/ 10 Surge Outlets, 2 USB Charging Ports
MX73316 Back-UPS Pro 1000S, 1000VA w/ 10 Surge Outlets, 2 USB Charging Ports MX73316 Back-UPS Pro 1000S, 1000VA w/ 10 Surge Outlets, 2 USB Charging Ports MX73316 Back-UPS Pro 1000S, 1000VA w/ 10 Surge Outlets, 2 USB Charging Ports MX73316 Back-UPS Pro 1000S, 1000VA w/ 10 Surge Outlets, 2 USB Charging Ports

Product Info

APC Back-UPS Pro 1000S, 1000VA – Stay Connected To What Matters

Power and protect all of your critical electronics while maintaining your internet connection during prolonged outages. The APC Back-UPS Pro BR1000MS keeps you connected to what matters the most by providing more runtime and battery backup outlets than ever before.

Features

  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced
  • Battery replacement without tools
    Enables fast battery replacement, lowering Mean Time to Repair (MTTR)
  • Boost and Trim Automatic Voltage Regulation (AVR)
    Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models)
  • Building wiring fault indicator
    This LED informs users of potentially dangerous wiring problems in the wall circuit
  • Catastrophic Event Protection
    Basic Surge Protector components such as MOVs and Thermal fuses ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike APC Surge Protector products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines
  • EMI and RFI noise filtering
    Reduces line noise that can cause data loss and keyboard errors
  • ENERGY STAR for UPS
    Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms
  • Lifetime data recovery warranty
    Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit
  • Performance Gaming Design
    Specially designed for performance gaming equipment, this battery backup protects gaming PCs, consoles and accessories from damaging power surges, interruptions and outages
  • PowerChute Personal Edition OS Compatibility
    This software supports numerous operating systems and processors
  • RoHS
    Certifies that electronic devices don't contain hazardous metals and flame retardants
  • USB charging ports
    Simultaneously charge mobile devices, including smartphones and tablets
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Features & Benefits

Marketing Features

  • Battery-protected and surge-only outlets
    Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost Automatic Voltage Regulation (AVR)
    Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery

Manageability

  • Audible Alarms
    Provides notification of changing utility power and UPS power conditions
  • LED status display
    Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power
  • USB connection
    Use your PC to access additional power protection and management features for your UPS via a USB port

Protection

  • Surge only outlets
    Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines
  • Battery and surge protected outlets
    Back up and protect your hardware and data during power outages, surges and spikes

Safety

  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Protection

  • Battery and surge protected outlets
    Back up and protect your hardware and data during power outages, surges and spikes
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines
  • Surge only outlets
    Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage

Availability

  • Customizable voltage-transfer points
    Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection
  • Customizable voltage sensitivity
    Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics
  • Boost and Trim Automatic Voltage Regulation (AVR)
    Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models)
  • Transformer-block spaced outlets
    Protect equipment with input transformer blocks without blocking access to other receptacles
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging
  • Cold-start capable
    Provides temporary battery power when the utility power is out

Warranty

  • 3 year warranty, $250,000 Equipment Protection Policy
    UPS and connected equipment insurance from the industry's most trusted power protection manufacturer.

Additional Information:

Visit the Manufacturer Web Page for Full Details

Specifications

Product Back-UPS Pro 1000VA Battery Backup & Surge Protector
Part Number BR1000MS
Color Black
   
Output  
Output Power Capacity 600 Watts / 1.0 kVA
Max Configurable Power 600 Watts / 1.0 kVA
Nominal Output Voltage 120V
Output Frequency (sync to mains) 60Hz +/- 3 Hz
Topology Line Interactive
Waveform Type Sine wave
Output Connections 10 total NEMA5-15R outlets:
6 NEMA 5-15R (Battery Backup)
4 NEMA 5-15R (Selector surge title)
Transfer Time 8 ms typical (10 ms maximum)
   
Input  
Nominal Input Voltage 120V
Input Frequency 60 Hz +/- 3 Hz (auto sensing)
Input Connections NEMA 5-15P
Input Voltage Range for Main Operations 88 ~ 147V
Max Input Current 12.0A
Cord Length 6 ft.
   
Batteries & Runtime  
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leak-proof
Typical Recharge Time 16 hour(s)
Expected Battery Life 3 ~ 5 years
Battery Volt-Amp-Hour Capacity 131
Runtime Chart Back-UPS ES Runtime Graph
Efficiency Chart Back-UPS ES Efficiency Graph
   
Communications & Management  
Interface USB
Control Panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
   
Surge Protection and Filtering  
Surge Energy Rating 1080 Joules
Filtering Full time multi-pole noise filtering: 5% of IEEE surge let-through: zero clamping response time: instantaneous
   
Environmental  
Temperature Operating: 0 ~ 40 °C
Storage: -15 ~ 40 °C
Relative Humidity Operating: 0 ~ 95 %
Storage: 0 ~ 95 %
Elevation Operating: 0 ~ 3,048 meters
Storage: 0 ~ 3,048 meters
Audible Noise 45 dBA
Online Thermal Dissipation N/A
   
Conformance  
Regulatory Approvals FCC Part 15 Class B, NOM, TUV C-US certified
RoHS Compliant
REACH Contains No SVHCs
   
Physical  
Maximum Height 26 cm
Maximum Width 10 cm
Maximum depth 36.8 cm
Net Weight 10.2kg

Package Contents

  • APC Back-UPS Pro 1000S, 1000VA, 120V, Sinewave, AVR, LCD, 2 USB Charging Ports, 10 NEMA Outlets (4 Surge) Battery Backup & Surge Protector
  • Coaxial Cable
  • USB Cable
  • User's Manual