LiteBeam® AC 2x2 MIMO airMAX® ac CPE with Dedicated Management Radio
The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.
The LiteBeam® is the latest evolution of a lightweight and compact, outdoor wireless broadband product from Ubiquiti Networks. Each of these models was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. It operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds.
The LiteBeam combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value.
The InnerFeed® technology (models LBE-M5-23 and LBE-5AC-23) integrates the entire radio system into the antenna feed, and our revolutionary airMAX TDMA protocol enhances network performance and scalability.
- Lightweight, low-cost solution
- Full adjustment flexibility
- Quick assembly and installation
Integrated airMAX® Technology
Unlike standard Wi-Fi protocol, the exclusive Ubiquiti Networks® airMAX® Time Division Multiple Access (TDMA) protocol allows each client to send and receive data using pre-designated time slots managed by an intelligent AP controller. This "time slot" method eliminates hidden node collisions and maximizes airtime efficiency.
Compared to other systems in its class, the LiteBeam products deliver superior performance in reduced latency, throughput, and scalability
Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Powerful Wireless Features:
- Access Point PtMP airMAX mixed mode
- airMAX ac protocol support
- Long-Range Point-to-Point (PtP) link mode
- Selectable channel width: PtP: 10/20/30/40/50/60/80 MH, PtMP: 10/20/30/40 MHz
- Automatic channel selection
- Transmit power control: Automatic/Manual
- Automatic Distance Selection (ACK Timing)
- Strongest WPA2 security
High-Gain, Directional, 2x2 MIMO Antenna
The LiteBeam® ac provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.
Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam® ac fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting.
Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the LiteBeam® AC is ideal for shipping and logistics.
|Product||LiteBeam AC airMAX CPE Access Point w/ InnerFeed® Technology|
|Interface||1 x 10/100/1000 Gigabit Ethernet ports|
|Ports||1 x Ethernet port|
|Processor||Atheros MIPS 74Kc, 533 MHz|
|Memory||64 MB DDR2|
|Antenna||Yes, 23 dBi|
|Channel Sizes||PtP Mode: 10/20/30/40/50/60/80 MHz
PtMP Mode: 10/20/30/40 MHz
|Operating Frequency||5150 ~ 5875 MHz|
|Management Radio||2412 ~ 2472 MHz|
|LED Indicator||Power, Ethernet|
|ESD/EMP Protection||± 24 kV Contact/Air|
|Power Method||Passive PoE (Pairs 4, 5+; 7, 8 Return)|
|Power Supply||24VDC, 0.3A Gigabit PoE adapter|
|Power Consumption||7W (max.)|
|Supported Voltage||24V ± 10%|
|Maximum TX Power||24 dBm|
|Mounting||Pole mount (kit included)|
|Wind Loading||275 N @ 200 km/h (61.8 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|Enclosure||Reflector (SGCC 0.6T), Plastic: PC|
|Temperature||Operating: -40 ~ 70°C (-40 ~ 158°F)|
|Humidity||Operating: 5 ~ 95%, non-condensing|
|Certifications||FCC, CE, IC|
|Dimensions||362 x 273 x 203 mm (14.25" x 10.75" x 7.99")|
|Weight||907g (2 lbs)|
- Ubiquiti LiteBeam AC 2x2 MIMO airMAX® ac CPE Access Point
- 24V, 0.3A PoE Gigabit Adapter w/ Mounting Bracket
- Power Cord
- Antenna Feed
- Centre Reflector Panel
- 2 x Side Reflector Panels
- Feed Receiver
- Ball Joint Mount
- Metal Strap
- Quick Start Guide