TP-Link CPE220 Outdoor CPE Access Point, 802.11n

MX71813 CPE220 Outdoor CPE Access Point, 802.11n
MX71813 CPE220 Outdoor CPE Access Point, 802.11n MX71813 CPE220 Outdoor CPE Access Point, 802.11n MX71813 CPE220 Outdoor CPE Access Point, 802.11n MX71813 CPE220 Outdoor CPE Access Point, 802.11n

Product Info

CPE220 – 2.4GHz 300Mbps 12dBi Outdoor CPE

TP-LINK's 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users.

  • Built-in 12dBi 2x2 dual-polarized directional MIMO antenna
  • Adjustable transmission power from 0 to 30dBm/1000mw
  • 6KV Lightning Protection, 15KV ESD Protection
  • Weather Proof Enclosure
  • System-level optimizations for more than 13km long range wireless transmission
  • TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
  • Centralized Management System – Pharos Control
  • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
  • Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Features

Enterprise Hardware

With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40°C (-40°F) to +70°C (158°F).

Advanced Antenna System

  • Built-in High Gain Dual-Polarized Antenna
  • Dedicated metal reflector ensures higher gain and lower noise interference

13km+ Wireless Data Transmission

Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.

TP-LINK MAXtream TDMA Technology

As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.

Pharos Control – Centralized Management System

CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

PharOS

User-friendly web-based management system allows professionals to do more specific configurations.

System Requirements

  • Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7
  • MAC OS
  • NetWare
  • UNIX
  • Linux

Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.

Specifications

Product Outdoor Wireless Access Point
Part Number CPE220
   
Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory RAM Memory: 64MB DDR2 RAM
Flash Memory: 8MB
Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)
   
Antenna Built-in 12dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 60° (H-Plane) / 30° (E-Plane)
Wireless Frequency 2.4 ~ 2.483 GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Wi-Fi Speeds Up to 300Mbps (40MHz, Dynamic)
Up to 144.4Mbps (20MHz, Dynamic)
Up to 72.2Mbps (10MHz, Dynamic)
Up to 36.1Mbps (5MHz, Dynamic)
Wi-Fi Range Up to 13km
Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 5km+, tested in the field.
Transmission Power 30dBm / 1000mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
   
Physical Interface 1 x 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in)
1 x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
1 x Grounding Terminal
1 x Reset Button
   
PoE Interfaces 1 x AC Jack with Earth Ground
1 x 10/100/1000Mbps Shielded Ethernet Port (Power + Data)
1 x 10/100/1000Mbps Shielded Ethernet Port (Data)
Power Efficiency >80%
PoE Output 24VDC @ 1.0A, Up to 24W
+4, 5pins; -7, 8pins
PoE Range Supports Power over Ethernet up to 60m
Power Status LEDs Green
   
Button Remote Reset Button
   
Power Options 1) AC Power Adapter
Input: 100-240 Vac @ 0.4A, 50-60 Hz
Output: 24Vdc @ 0.5A

2) Passive Power over Ethernet via LAN0 (+4, 5pins; -7, 8pins)
Voltage range: 16-27 Vdc

Power Consumption 10.8W max.
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
   
Protection 15KV ESD Protection
6KV Lightning Protection
IP Rating IPX5 Waterproof Certification Enclosure
Outdoor ASA Stabilized Plastic Material
   
Software Configuration Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
- Beacon Interval/RTS Threshold/Fragmentation
- Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management Discovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
System Tools Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications
Hardware watch dog
   
Temperature Operating: -30 ~ 70°C (-22 ~ 158°F)
Storage: -40 ~ 70°C (-40 ~ 158°F)
Humidity Operating: 10 ~ 90%, non-condensing
Storage: 5 ~ 95%, non-condensing
   
Certifications CE, FCC, RoHS, IPX5
   
Dimensions (WxHxD) 276 x 60 x 79 mm (11" x 2.1" x 3.1")
Weight N/A

Package Contents

  • TP-Link CPE220 Outdoor CPE Access Point
  • 24V 1A Passive PoE Adapter
  • Pole Mounting Straps
  • AC Power Cord
  • Installation Guide