Corsair Hydro Series H60 (2018) Liquid CPU Cooler

MX71549 Hydro Series H60 (2018) Liquid CPU Cooler
MX71549 Hydro Series H60 (2018) Liquid CPU Cooler MX71549 Hydro Series H60 (2018) Liquid CPU Cooler MX71549 Hydro Series H60 (2018) Liquid CPU Cooler MX71549 Hydro Series H60 (2018) Liquid CPU Cooler

Customer Reviews

Average Rating: 4.3 / 5 With 3 Customer Reviews

Review Submitted!

Your product review has been submitted! Our moderation team will take a look and if meets our submission guidelines you should see it online shortly.

Review Guidelines

  • Please keep your review to your experiences with the product and how well it performs.
  • Please use appropriate language that is suitable for all ages.
If the guidelines are not followed your review may not be accepted.
Review Submission
  • 1
Thursday, July 16, 2020
By: Yarrow
From: Nanaimo

H60 good buy

Strengths:

quick easy install, keeps things cool

Weaknesses:

Instructions don't specify that you have to slide brackets back to fit different intel boards.

Additional Comments:

Good so far, upgraded stock cooler on my i5-8600K Overclocked to 4,200mhz; 6° C cooler while idling and 20° C cooler while under load. Also keeps everything in mt case cooler, as it exhausts through the back. Very happy.
Sunday, December 15, 2019
By: Kyle
From: Langley

OK cooler but screwing holes are tiny

Strengths:

It's an ok cpu cooler

Weaknesses:

Screw holes and placement

Additional Comments:

The screw holes are so tiny, I tried to screw in. It was impossible to screw in with a phillips head so I used a flathead. Even then, it was still so hard and wouldn't go in and as a result I scratched my case which I'm not quite happy about. I think it wouldn't hurt to spend two cents for Corsair to make a half decent mounting system.
Tuesday, August 20, 2019
By: Dale
From: Calgary

Was skeptical, now I'm a believer!!

Strengths:

I just recently blew an old AMD CPU Phenom II 1075T. Long story short I salvaged the PC with an older AMD Phenom II 965 but it seemed to be running hot. Because I'm looking at a new build soon, I thought I'd try this CPU cooler to test for now and inform future decisions. I was skeptical a liquid cooler would make much of a difference.... Holey smoke was I wrong. CPU easily runs 10ºC cooler, under load and while running idle. I'm a believer...

Weaknesses:

The install wasn't that foolproof!! The radiator just fit the older ATX case. Caution make sure your case holes line up w/radiator holes. I didn't look all that closely, ended up going through the radiator itself. I was lucky, there appear to be no leaks. Also had trouble mounting the fan to the radiator, it was easier to do before attaching the radiator to the case contrary to what the instructions say. As I type this, CPU is idling at 30ºC with 20% load.

Additional Comments:

I would recommend this product. I think it is worth the extra spend on any build.
  • 1