Cisco WAP571E Wireless-AC Dual Radio Outdoor Wireless Access Point

MX69202 WAP571E Wireless-AC Dual Radio Outdoor Wireless Access Point
MX69202 WAP571E Wireless-AC Dual Radio Outdoor Wireless Access Point MX69202 WAP571E Wireless-AC Dual Radio Outdoor Wireless Access Point

Product Info

Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor WAP

Install Gigabit Wi-Fi for the Outdoors Spaces
Don't let outdoor challenges inhibit your wireless connectivity. The Cisco WAP571E access point is purpose-built to meet the demands of your outdoor spaces. It offers a rugged housing (IP66 rated), and works even in rain, snow, and extreme high and low temperatures.

  • Provides cost-effective 802.11ac outdoor connectivity up to 1.9Gbps!
  • Supports 3x3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance on both 2.4- and 5.0-GHz radios
  • Outdoor-rated IP66 enclosure designed for challenging outdoor environments such as rain and extreme temperatures, as well surge protection support
  • Dual Gigabit Ethernet LAN with Energy Efficient Ethernet and link aggregation support
  • A captive portal helps enable highly secure guest access with customized roles and rights
  • Single Point Setup requires no controller for easy, cost-effective deployment of multiple access points
  • Works right out of the box with easy installation and a simple web-based configuration and wizard

Features

The WAP571E access point delivers high-performance Wi-Fi connectivity for outdoor deployments, supporting 802.11ac technology.

This Wireless Access Point:

  • Provides 802.11ac outdoor connectivity with speed up to 1.9 Gbps
  • Supports 3x3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance on both 2.4- and 5.0-GHz radios
  • Includes an outdoor-rated IP66 enclosure designed for challenging outdoor environments, and surge protection support
  • Offers dual Gigabit Ethernet LAN with Energy Efficient Ethernet and link aggregation support

This WAP571E wireless access point also includes Single Point Setup. This controller less technology simplifies the deployment and management of multiple access points, without requiring additional hardware.

Other features that make management easy:

  • Simple installation and an intuitive web-based configuration and wizard for setup in minutes
  • Support for Power over Ethernet (PoE) for easy installation without expensive additional wiring
  • Sleek design with multiple internal antennas and a versatile mounting kit for installation on a pole or a wall Workgroup Bridge mode to expand your network by wirelessly connecting to a second Ethernet network

Additional Information:

Visit the Manufacturer Data Sheet Web Page

Specifications

Make and Model Cisco WAP571 Wireless Access Point
Part Number WAP571E-B-K9
   
Interfaces 2x Gigabit Ethernet (RJ45) ports
Frequency Band Dual Band Radios: 2.4GHz / 5 GHz WiFi Bands
Wireless 802.11ac
3x3 Multiple-input multiple-output (MIMO) technology with 3 spatial streams for maximum performance on both 2.4 & 5.0 GHz Radios
Operating Modes Access Point Mode
Wireless Domain Services (WDS) Bridging
Workgroup Bridge Mode
VLAN Support 802.1Q VLAN
1x Management VLAN
32x Active VLANs
   
Network Standards 802.11ac
802.11n
802.11g
802.11b
802.11a

802.1D (Spanning Tree)
802.1Q (VLAN)
802.1X (security authentication)
802.11e (wireless QoS)
802.11i (WPA2 security)
802.3af
802.3u

IPv4 (RFC 791)
IPv6 (RFC 2460)
   
Quality of service (QoS) Wi-Fi Multimedia & Traffic Specifications (WMM TSPEC), client QoS
Maximum APs 16 Per Cluster
Active Clients 960 Per Cluster
Management Protocols Web Browser, Simple Network Management Protocol (SNMP) v3, Bonjour
   
Certifications Safety:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1

Radio Approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
AS/NZS 4268.2003 (Australia and New Zealand)

EMI and Susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 301.489-1 and -17 (Europe)
   
Temperature Operating: -40 ~ 55° C
Storage: –50 ~ 70° C
Humidity Operating: 5 ~ 95% RH, noncondensing
Storage: 5 ~ 90% RH, noncondensing
   
Power Input: IEEE802.3af compliant PoE
Power Consumption: 18W
Power Options Poe Power via 802.3af/at RJ45 Input

Cisco SB-PWR-INJ-12V-xx Power Injector

   
Dimensions 230 x 200 x 50mm
Weight 1.35kg