D-Link DPE-301GS: 1-Port Gigabit PoE Splitter
The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input of 5Vdc, 9Vdc or 12Vdc.
It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal.
Users can select from 5Vdc, 9Vdc and 12Vdc power for their device using a selectable DIP switch on the device.
- Uses incoming power from PoE Switch / Injector to low-voltage DC power
- Ideal for non-PoE access points, IP cameras and VoIP phones
- Supports 5Vdc, 9Vdc and 12Vdc via selectable switch
- Lightweight, compact and easy to install
- Supports 802.3af & 802.3at network PoE protocols
- 10/100/1000 interface provides flexibility for all types of connections
How It All Works
The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector.
The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port.
Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.
PoE Injector & PoE Splitter Tandem
In more advanced situations, both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.
|Device Type||1-Port Gigabit PoE Splitter|
1x RJ45 Gigabit LAN In Port w/ PoE Power
|Network Standards||CSMA / CD
Half / Full-Duplex Operation
IEEE 802.3 / 10BASE-T
|Voltage Switch||Selectable 5Vdc, 9Vdc or 12Vdc Output Switch|
|Temperature||Operating: 0 ~ 60° C
Storage: -30 ~ 70° C
|Humidity||Operating: 5 ~ 95% RH, non-condensing
Storage: 5 ~ 95% RH, non-condensing
|Environmental Use||Indoor Use Only
Keep the DSP-W215 away from wet environments
|Temperature||Operating: 0 ~ 40° C (32 ~ 104° F)
Storage: -20 ~ 65° C (-4 ~ 149° F)
|Humidity||Operating: 10 ~ 90% Non-Condensing
Storage: 5 ~ 95% Non-condensing
|Certifications||CE, FCC, RCM, RoHS, VCCI|
|Power Consumption||Up to 32.4W|
|Dimensions (LxWxH)||110 x 62 x 24.5mm|