Tower CPU Cooler for AMD Ryzen™ Threadripper™ sTR4
Freezer 33 TR
The Freezer 33 TR is designed specifically to cool AMD's multi-core monster chips, but Arctic says the tower cooler also is compatible with Intel's Socket 2066 and 2011-3 (square ILM only).
The new cooler measures 155 x 89 x 123 mm. It can handle a recommended TDP of up to 200W. The cooling is provided by 4 x 6mm heatpipes that transfer heat to an aluminum heatsink with 49 fins. A newly designed 120mm BioniX F120 fluid dynamic bearing fan spins at 200 ~ 1,800 rpm to cool the heatsink. The fan is controlled via PWM.
- 4 x Ø6 mm high performance direct touch copper heatpipes
- High air flow design for air cooling
- Long life hydraulic bearing for reliable and silent operation
- Heat-sink with 0.4mm aluminum fins provide best heat dissipation
- Tower side flow design optimizes cooling performance
The Freezer 33 TR is an updated version of our award-winning Freezer 33 and specially designed for the new AMD Ryzen Threadripper CPU. The base of the heatsink has been enlarged to fit the massive AMD SocketTR4 and, equipped with a BioniX F120 fan, it pushes the cooling performance further to cope with the 180 W TDP of the AMD Ryzen.
The Freezer 33 TR is the perfect CPU cooling solution for enthusiasts who want to build High-End Desktop Computer on a budget.
Extremely silent operation through 3-phase motor guarantees long sessions without annoying noise.
Wide Range of Regulation
With the range of 200 to 1800 RPM the BioniX F120 fan of the Freezer 33 TR is controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed.
Extended Life Span
10°C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.
Improved Heat Dissipation
The Freezer 33 TR has off-centered heat pipes that dispense the heat in a more efficient way than the centered ones of its predecessors. Also, the layout of the 49 aluminum fins creates micro vortices that boost the airflow and circulate it around the heatpipes.
A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
Enlarged base for AMD Threadripper
The Freezer 33 TR is specifically designed for the new AMD Ryzen Threadripper sTR4 Processor and delivers extremely quiet cooling for High-End Desktop Computers.
Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.
Easy Installation & Safe Transportation
Thanks to different mounting models for various sockets, a backplate and a significantly lower weight compared to the i30, the Freezer 33 TR is not only fool-proof to install, but also absolutely transport safe.
We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker at a place of your convenience and never waste time again looking for product instructions.
- Socket compatibility:
- Intel LGA 2011-v3* / 2066**
- AMD AM4 / sTR4
- Fan compatibility: 120 x 120 x 25 mm
* SQUARE ILM (80 x 80 mm spacing) only.
** c't magazin has shown in issue 17/2017 on page 96 that Intel i9 CPUs on socket 2066 may draw up to 270 Watts since wrongly programmed BIOS by mainboard manufacturers fail to limit the TDP of the CPU to the specified 140 Watts. This may lead to thermal throttling of the CPU.
|Product||Freezer 33 TR CPU Cooler|
|Material||Aluminum cooling fins, copper heatpipes, Teflon plate, Steel shaft|
|Bearing Type||Fluid Dynamic Bearing|
|Fan RPM||200 - 1,800 rpm (controlled by PWM)|
|Noise Level||0.5 sone|
|Fan Dimension||120 x 120 x 25 mm|
|Recommended for TDP||Up to 200W|
|Connector||4 pin PWM|
|Dimensions (HxWxD)||155 x 123 x 89 mm|
- Arctic Cooling Freezer 33 TR CPU Cooler (Red/Black)
- Arctic Cooling Premium Fan
- 2 x M3 6mm Screws
- 4 x M4x18mm Screws
- 4 x screws for AMD Socket AM4
- 4 x M3.5x8.8mm Screws
- 4 x M3x8.7mm Screws
- 1 x MX-4 Thermal Paste
- 4 x Spacers
- 2 x Wires
- 2 x Mounting Clips
- 2 x Mounting Plates
- User's Manual