LiteBeam® AC Gen 2 – airMAX® ac CPE with Dedicated Management Radio
The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.
Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.
- Lightweight, low-cost solution
- Full adjustment flexibility
- Quick assembly and installation
Management Wi-Fi Radio
The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Improved Noise Immunity
The LiteBeam® 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam® 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Ubiquiti's InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Featuring high performance and innovative mechanical design, the LiteBeam® 5AC Gen 2 is versatile and cost-effective to deploy.
Full Adjustment Flexibility
The LiteBeam® 5AC features a two-mount system that provides adjustment flexibility along both axes for versatile mounting options. The mounting system, coupled with the built-in bubble level, enables quick and easy alignment.
Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the LiteBeam® AC offers a more robust mount with separate azimuth and elevation adjustments.
Now with airOS®8 and airView®
airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Powerful Wireless Features:
- Access Point PtMP airMAX mixed mode
- airMAX ac protocol support
- Long-Range Point-to-Point (PtP) link mode
- Selectable channel width: PtP: 10/20/30/40/50/60/80 MH, PtMP: 10/20/30/40 MHz
- Automatic channel selection
- Transmit power control: Automatic/Manual
- Automatic Distance Selection (ACK Timing)
- Strongest WPA2 security
High-Gain, Directional, 2x2 MIMO Antenna
The LiteBeam® AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity.
Breakthrough Industrial Design
Featuring the freedom of three-axis alignment, the LiteBeam® AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting.
Compact in Size, Light in Weight
A lightweight form factor contained within ultra-compact packaging, the LiteBeam® AC is ideal for shipping and logistics.
|Product||LiteBeam AC Gen 2 Access Point|
|Interface||1 x 10/100/1000 Gigabit Ethernet ports|
|Ports||1 x Ethernet port|
|Processor||MIPS 74 Kc|
|Memory||64 MB DDR2|
|Channel Sizes||PtP Mode: 10/20/30/40/50/60/80 MHz
PtMP Mode: 10/20/30/40 MHz
|Operating Frequency||5150 ~ 5875 MHz|
|Management Radio||2412 ~ 2472 MHz|
|LED Indicator||Power, Ethernet|
|ESD/EMP Protection||± 24 kV Contact/Air|
|Power Method||Passive PoE (Pairs 4, 5+; 7, 8 Return)|
|Power Supply||24VDC, 0.3A Gigabit PoE adapter|
|Power Consumption||7W (max.)|
|Supported Voltage||24V ± 10%|
|Maximum TX Power||21~25 dBm|
|Wind Loading||275 N @ 200 km/h (61.8 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|Enclosure||Reflector (SGCC 0.6T), Plastic: PC|
|Temperature||Operating: -40 ~ 70°C (-40 ~ 158°F)|
|Humidity||Operating: 5 ~ 95%, non-condensing|
|Certifications||FCC, CE, IC|
|Dimensions||358 x 271.95 x 272.5 mm (14.1" x 10.7" x 10.73")|
|Weight||800g (1.76 lb) (without mount)
980g (2.16 lb) (with mount)
- Ubiquiti LiteBeam AC Gen 2 AC Access Point
- 24V, 0.3A PoE Gigabit Adapter w/ Mounting Bracket
- Power Cord
- Antenna Feed
- Centre Reflector Panel
- 2 x Side Reflector Panels
- Feed Receiver
- Azimuth Mount
- Elevation Mount
- Metal Strap
- Knob Kit
- Quick Start Guide