Ubiquiti EdgePoint S16 16-Port Intelligent WISP Control Point Switch w/ 2x SFP+ Ports
Product Info
Intelligent WISP Control Point with FiberProtect™
The EdgePoint™ offers an innovative combination of robust routing performance, fiber backhaul capability, with the convenience of passive PoE support.
The EP-S16 EdgePoint 16-Port Gigabit PoE-Compliant WISP Switch from Ubiquiti is designed to simplify your hardware by replacing the network cabinet, which usually contains a patch panel, power rack, multiple PoE adapters, switch, router, modem, and more. It is encased in a die-cast aluminum alloy and polycarbonate shell with UV resistance, and features a combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support. With the EP-S16, you'll have access to a total of sixteen ports: two input or output ports with 54V or 24V / 1.4A passive PoE, two output ports with 54V or 24V / 1.4A passive PoE, and twelve PoE+ or 24V / 0.7A passive PoE output ports. Furthermore, use the EdgePoint software, accessible via a network port and a web browser, to monitor and manage your network.
- Weatherproof enclosure for outdoor use
- FiberProtect, Fiber backhaul capability
- WISP control
- All-in-one design
- Versatile power options
- Intuitive user interface
Breakthrough in Tower Deployment
The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity.
Features
Purpose-Built for WISP Control
The first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX® with fiber backhaul and versatile powering capabilities.
All-in-One Design
A single, compact controller eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance.
Advanced Routing Applications
Powerful routing features; such as link balancing, provide redundancy and increased performance for outdoor wireless links.
Power Options
Either the VDC or PoE input type is used at any one time. If both are connected, only the input type with the highest voltage will be used; the other can be used as a backup. Both PoE inputs can be used at the same time. If there is a voltage difference, the higher-voltage source will be used first. The voltage from the initial source will drop as the load increases. When the voltage drops to the same level as the lower-voltage source, then the lower-voltage source will also start providing power.
Additional Information:
Visit the Manufacturer Web Page for Full Details
Specifications
Make and Model | Ubiquiti 16-Port EdgePoint™ Switch |
---|---|
Part Number | EP-S16 |
Ports | 2 x 1/10 Gbps SFP+ ports 16 x 10/100/1000 RJ45 ports Serial Console Port: 1 x RJ45 port PoE Port: 2 x RJ45 PoE input ports |
Processor | ARM Cortex-A9 400 MHz |
RAM | 256MB DDR3 RAM |
Code Storage | 32 MB |
Performance | Non-Blocking Throughput: 36 Gbps Switching Capacity: 72 Gbps Forwarding Rate: 53.57 Mpps |
Button | Reset |
LEDs | Power Speed/Link/Activity, PoE Speed/Link/Activity |
Wind Loading | 153N @ 200km/h (34lbf @ 125mph) |
Wind Survivability | Up to 200km/h (125mph) |
Power | DC Terminal Block or 2 x RJ45 (Port 1 and 2) (Self-Correcting Polarity Protection on DC Terminal Block Only, Diode ORed Protection on All Power Inputs |
Power Consumption | 54Vdc @ 6A, 40W max. (excludes PoE output) |
PoE Inputs | 2 x 54V/1.5A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 and 2 (Do NOT configure Port 1 or 2 in PoE output mode if you are using PoE input power sources) |
PoE Outputs | 4 x 54V or 24V /1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, Ports 1 to 4 12 x 802.3af/at or 24V/0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, Ports 5 to 16 |
PoE Voltage Range | 42 ~ 56Vdc |
Temperature | Operating: -40 ~ 65°C |
Humidity | Operating: 10 ~ 90% RH, non-condensing |
Enclosure | Diecast Aluminum Alloy and Polycarbonate with UV resistance |
Certifications | CE, FCC, IC |
Dimensions | Without Wall Mount: 327 x 383 x 88.8mm (12.9" x 15.1" x 3.5") |
Weight | Without Wall Mount: 3.4kg (7.5 lbs) With Wall Mount: 3.8kg (8.4 lbs) |
Package Contents
- Ubiquiti EdgePoint™ EP-S16 16-Port Gigabit Switch
- Gigabit PoE w/ Mounting Bracket
- Power Cord
- Wall-Mount Bracket
- 2 x Metal Straps
- 20 x Cable Ties
- 4 x Wall-Mount Screws
- 4 x Wall-Mount Anchors
- 2 x Phillips Bolts
- 2 x PoE Screws
- 2 x PoE Anchors
- Cable Sleeve
- S2 Hex Wrench
- Quick Start Guide