NZXT Kraken G12 GPU Mounting Kit For Kraken Series Liquid Coolers, Black

MX66997 Kraken G12 GPU Mounting Kit For Kraken Series Liquid Coolers, Black
MX66997 Kraken G12 GPU Mounting Kit For Kraken Series Liquid Coolers, Black MX66997 Kraken G12 GPU Mounting Kit For Kraken Series Liquid Coolers, Black MX66997 Kraken G12 GPU Mounting Kit For Kraken Series Liquid Coolers, Black MX66997 Kraken G12 GPU Mounting Kit For Kraken Series Liquid Coolers, Black

Customer Reviews

Average Rating: With 2 Customer Reviews

Review Submitted!

Your product review has been submitted! Our moderation team will take a look and if meets our submission guidelines you should see it online shortly.

Review Guidelines

  • Please keep your review to your experiences with the product and how well it performs.
  • Please use appropriate language that is suitable for all ages.
If the guidelines are not followed your review may not be accepted.
Review Submission
  • 1

Fantastic temperatures

Submitted on Sunday, April 14, 2019
By Dwayne
From Edmonton

Strengths of the product

Cool temperatures Great for overclocking

Weaknesses of the product

None

Additional Comments

My 980 ti reference card was always in the high 80's with a mild overclock and custom fan curve. Now im overclocked to 1440Mhz on the core and never go past 55° C. I used a Corsair H55 with the G12. Its so quiet now too. I used a large pea size of MX4 thermal compound. Mount to video card before using foam inserts for best contact with gpu die. I didn't use any back plates, front plates or shims. Just mount to the bare pcb and enjoy.

Works Great....

Submitted on Friday, March 02, 2018
By Kbird
From BC

Strengths of the product

I have the EVGA 980 Ti SC+ ,(4995 model) but it was regularly idling at 66 ~ 68° C with my multi monitor system so I ended up getting this NZXT Kraken G12 (not G10) and using my H80i-GT with it , even though NZXT said it wasn't compatible when I asked...
However I knew it was a Asustek based AIO, so I took a risk and picked it up (I figured I'd buy a H90 or H55 if I was wrong too) . I left the factory back plate and Front Plate on for now and used a Copper "Shim" to do that... , and it is currently running about 30° C cooler at idle than it was with the Factory Cooler (ACX2+) ...... (36 ~ 40° vs 66 ~ 69°)

Weaknesses of the product

none

Additional Comments

above H80i-GT now replaced with a H80i-V2 under Warranty. just loosen the 4 screws on the bottom of the Pumphead to get it to engage the Kraken G12 , and then re-tighten them.
  • 1