Cisco SPA122 ATA with Router

MX65418 SPA122 ATA with Router
MX65418 SPA122 ATA with Router MX65418 SPA122 ATA with Router MX65418 SPA122 ATA with Router MX65418 SPA122 ATA with Router

Product Info

Cisco SPA122 ATA with Router – Protect and extend your analog investments

Protect and extend your investment in existing analog telephones, conference speakerphones, and fax machines with the Cisco SPA122 ATA with Router. More easily control your migration to IP voice with this extremely affordable, reliable solution.

Eliminate compromise on voice quality or features for phone and fax capabilities associated with Internet voice over IP (VoIP) service. Cisco® VoIP solutions provide the quality, peace of mind, and investment protection at an affordable price. The Cisco SPA122 ATA with Router combines VoIP services with an internal router for LAN connectivity. Easy to install and use, it works over an IP network to connect analog phones and fax machines to a VoIP service provider and provides support for additional LAN connections.

It is compact in design and compatible with international voice and data standards. It can be used with residential, home-office, and small-business-VoIP service offerings, including full-featured IP Centrex environments. This easy-to-use solution delivers advanced features to better connect employees and serve customers, all on a highly secure Cisco network.

The Cisco SPA122 ATA with Router includes two standard telephone ports, each with an independent phone number, for use with fax machines or analog phone devices. It also features one fast Ethernet WAN port, and one fast Ethernet LAN port for a local home or business network connection.

  • Enables high-quality VoIP service with a comprehensive feature set through a broadband Internet connection
  • Uses advanced voice quality-of-service (QoS) capabilities and the voice Session Initiation Protocol (SIP) stack
  • Supports reliable faxing with simultaneous voice and data use
  • Is compatible with all industry voice and data standards and common telephone features
  • Includes a simple-to-use web-based configuration utility for easy deployment

Features

Toll-quality Voice and Carrier-class Feature Support

The Cisco SPA122 delivers clear, high-quality voice communication under a variety of network conditions. Excellent voice quality in challenging, changeable IP network environments is made possible through the advanced implementation of standard voice coding algorithms. The Cisco SPA122 is inter-operable with common telephony equipment such as fax, voicemail, private branch exchanges (PBXs) and key telephone systems (KTSs), and interactive voice response systems.

Large-scale Deployment and Management

The Cisco SPA122 enables service providers to provide customized services to their subscribers. It can be remotely provisioned and supports dynamic, in-service software upgrades. A highly secure profile upload saves providers the time and expense of managing and preconfiguring or reconfiguring customer premises equipment (CPE) for deployment.

Outstanding Security

The Cisco SPA122 supports highly secure, encryption-based methods for communication, provisioning, and servicing.

Compact Size

Designed for small spaces, the Cisco SPA122 can be installed as a desktop unit or mounted on a wall.

Comprehensive Feature Set

The standards-based Cisco SPA122 is compatible with Internet VoIP provider features such as caller ID, call waiting, voicemail, call forwarding, distinctive ring, and much more to provide a complete, affordable, and highly reliable VoIP solution.

Easy Installation and Changes

The web-based configuration utility enables quick deployment and easy changes.

Investment Protection

Businesses that are growing rapidly can use the solution with other Cisco Unified Communications solutions, providing industry-leading investment protection.

Peace of Mind

Cisco solutions deliver the solid reliability you expect from Cisco. All solution components have been rigorously tested to help ensure easy setup, interoperability, and performance.

Specifications

Product ATA with Router
Part Number SPA122
   
Network Standard MAC address (IEEE 802.3)
IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883)
Address Resolution Protocol (ARP)
Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782)
Dynamic Host Configuration Protocol (DHCP) server and client (RFC 2131)
DHCP client reservation
DHCP Options 159 and 160
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
Internet Control Message Protocol (ICMP) (RFC 792)
TCP (RFC 793)
User Datagram Protocol (UDP) (RFC 768)
Real Time Protocol (RTP) (RFC 1889) (RFC 1890)
Real Time Control Protocol (RTCP) (RFC 1889)
Differentiated Services (DiffServ) (RFC 2475) and type of service (ToS) (RFC 791/1349)
VLAN tagging (IEEE 802.1p)
Simple Network Time Protocol (SNTP) (RFC 2030)
Upload data rate limiting: static and automatic
QoS voice packet prioritization over other packet types
MAC address cloning
Port forwarding
SIP channels support both UDP and TCP transport
VPN pass-through with IP Security encapsulating security payload (IPsec ESP), Point-to-Point Tunneling Protocol (PPTP), and Layer 2 Tunneling Protocol (L2TP)
Data Rates N/A
Transmit/Receive N/A
Physical Interfaces 1 x WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)
1 x LAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)
2 x RJ-11 FXS phone ports for analog circuit telephone device (tip and ring)
1 x Reset button
Concurrent Dual Band /
Operating Frequency
N/A
Antennas N/A
USB Port N/A
   
Voice Gateway SIPv2 (RFC 3261, 3262, 3263, and 3264)
SIP proxy redundancy: dynamic through use of DNS SRV A records
Reregistration with primary SIP proxy server
SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN])
Highly secure (encrypted) calling using Secure RTP (SRTP)
Codec name assignment
G.711 (A-law and μ-law)
G.726 (32 kbps)
G.729 A
Dynamic payload
Adjustable audio frames per packet
Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP information)
Voice Features QoS (Ethernet port upstream bandwidth control)
Independent configurable dial plans with interdigit timers and IP dialing (1 per port)
Call progress tone generation
Jitter buffer: Adaptive
Frame loss concealment
Full-duplex audio
Echo cancellation (G.165 and G.168)
Voice activity detection (VAD)
Silence suppression
Comfort noise generation (CNG)
Attenuation and gain adjustments
Flash hook timer
Message waiting indicator (MWI) tones
Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK)
Polarity control
Hook flash event signaling
Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards Institute (ETSI)
Streaming audio server: Up to 4 sessions
Music on hold
Call waiting, call waiting and caller ID
Caller ID with name and number
Caller ID blocking
Selective and anonymous call rejection
Call forwarding: No answer, busy, and all
Do not disturb
Call transfer, call return, and call back on busy
Three-way conference calling with local mixing
Per-call authentication and associated routing
Call blocking with toll restriction
Distinctive ringing: Calling and called number
Off-hook warning tone
Advanced inbound and outbound call routing
Hotline and warmline calling
Long silence (configurable time setting) silence threshold
Disconnect tone (for example, reorder tone)
Configurable ring frequency
Ring validation time setting
Tip and ring voltage adjustment setting
Ring indication delay setting
Fax Capability Fax tone detection pass-through
Fax pass-through using G.711
Real-time fax over IP using T.38 fax relay (T.38 support is dependent on fax machine and network and transport resilience)
   
Security Password-protected system reset to factory default
Password-protected administrator and user access authority
Provisioning, configuration, and authentication
HTTPS with factory-installed client certificate
HTTP digest: Encrypted authentication using MD5 (RFC 1321)
Up to 256-bit Advanced Encryption Standard (AES) encryption
SIP Transport Layer Security (TLS)
   
Subscriber Line Interface Circuit (SLIC) Ring voltage: 40–90 Vpk configurable
Ring frequency: 20–25 Hz
Ring waveform: Trapezoidal
Maximum ringer load: 5 ringer equivalence numbers (RENs)
On-hook voltage (tip and ring): –46 to –56V
Off-hook current: 18–25 mA
Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm
150 nF complex impedance
Frequency response: 300–3400 Hz
Return loss (600 ohm, 300–3400 Hz): up to 20 dB
Insertion loss (1 Vrms at 1 kHz): 3–4 dB
Total harmonic distortion (THD) (350 mV peak at 300 Hz): up to 3%
Idle channel noise: 72 dB (typical)
Longitudinal balance: 55 dB (typical)
Off-hook threshold (line seizure): Rdc < 1000 ohm
On-hook threshold (line release): Rdc >10000 ohm
Rdc DC supervisory range: Rdc > 450 ohm
   
Power Supply Power adapter
Input 100-240 VAC, 50/60Hz, w/1.8m cord
Output 5V DC, with max. 2.0A current
Power Consumption 5W
   
LED Indicators Phone 1
Phone 2
Internet
Power
   
Compliance FCC (Part 15 Class B), CE, ICES-003, A-Tick certification, Restriction of Hazardous Substances (RoHS), and UL
   
Temperature Operating: 0 ~ 45 °C (32 ~ 113 °F)
Storage: -25 ~ 70 °C (-77 ~ 158 °F)
Humidity 10 ~ 90% non-condensing
   
Dimensions (WxHxD) 3.98" x 3.98" x 1.10" (101 x 101 x 28 mm)
Weight 153g

Package Contents

  • Cisco SPA122 ATA with Router
  • Power Adapter
  • Ethernet Cable (6ft / 1.83m)
  • Quick Start Guide
  • CD with Documentations