HP 2530-24G-PoE+ Switch
The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Cost-Effective, Reliable and Secure Access Layer Switches
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0.
Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks.
Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service
The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS.
Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Simple Deployment and Management
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
Quiet operation with fanless and variable speed fan models.
Flexible deployment with wall, table, and rack mounting options.
Single View of the Network
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
|Ports||24 x RJ-45 autosensing 10/100/1000 PoE+ ports
4 x fixed Gigabit Ethernet SFP ports
|Memory and processor||ARM9E @ 800 MHz; 128 MB flash; packet buffer size: 1.5 MB dynamically allocated; 256 MB DDR3 DIMM|
|Latency|| 100 Mb Latency: < 7.4 µs
1000 Mb Latency: < 2.3 µs
|Switching capacity||56 Gb/s|
|PoE capability||195 W|
|Stacking capabilities||Virtual, 16 Switches|
|Management features||IMC - Intelligent Management Center
out-of-band management (serial RS-232C or Micro USB)
IEEE 802.3 Ethernet MIB
Ethernet Interface MIB
|Power consumption||247 W (maximum)|
|Input voltage||100 - 127 / 200 - 240 VAC|
|Temperature||Operating: 0 to 45°C|
|Humidity||Operating: 15 to 95% @ 104°F (40°C) (noncondensing)|
|Heat dissipation||135 BTU/hr (142.42 kJ/hr)|
|Dimensions||44.3 x 33.02 x 4.45 cm (17.44 x 13 x 1.75 in)|
|Weight||3.95 kg (8.70 lb)|