Kingston ValueRAM 4GB PC3-10600 SODIMM for Notebooks

MX50530 ValueRAM 4GB PC3-10600 SODIMM for Notebooks
MX50530 ValueRAM 4GB PC3-10600 SODIMM for Notebooks

Product Info

Memory Specifically Designed and Tested to Meet Industry Standards

Kingston® ValueRAM® delivers the same reputable, high-quality Kingston memory modules you've known for years at competitive prices for the white box market. Kingston ValueRAM modules are designed and validated to meet or exceed industry specifications, including JEDEC and the specification set forth by chipset, motherboard and system manufacturers worldwide.

Kingston's KVR13S9S8/4 is a 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 204-pin SODIMM uses gold contact fingers for increased conductivity.


  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB: Height 1.18" (30mm), double sided component


Designed to replace or upgrade a standard laptop SODIMM module


Capacity 4GB
Memory Type DDR3 PC3-10600 SODIMM
Configurations 1 x 4GB
Speed 1333 MHz
Timing CL9
Voltage 1.5V
Pins 204-pin SODIMM
Heatspreader None