Welcome Guest
Announcements:
4
0 items ($0.00) in your cart
  • MX46957 ValueRAM 8GB DDR3-1333MHz Dual Channel Kit (2 x 4GB)

ValueRAM 8GB DDR3-1333MHz Dual Channel Kit (2 x 4GB)

From 1 Customer Reviews

Product Info

ValueRAM's KVR13N9S8K2/8 is a kit of two 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 8GB. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers.

Features

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB: Height 0.740” (18.75mm), single sided component

Specifications

Capacity 8GB (2 x 4GB Kit)
Memory Type DDR3 PC3-10600 SDRAM
Speed 1333MHz
Timing 9-9-9
Voltage 1.5V
Pins 240-pin Unbuffered SDRAM
Heatspreader None