Battery Backup & Surge Protector for Electronics and Computers
Back up and protect your hardware and data during power outages, surges and spikes with the APC Back-UPS CS 500. APC Back-UPS provide extra runtime time during power outages allowing you to save your work and shut down your computer safely.
- Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
- Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Lifetime data recovery warranty
Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
- Serial connection
Use your PC to access additional power protection and management features for your UPS via a serial port.
- Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
- Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
- USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- LED status display
Quickly understand unit and power status with visual indicators.
- Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
- Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
- Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment..
|Output power capacity||300Watts / 500VA|
|Max Configurable Power (Watts)||300Watts / 500VA|
|Nominal Output Voltage||120V|
|Output Frequency (sync to mains)||50/60Hz +/- 3 Hz|
|Waveform type||Stepped approximation to a sinewave|
|Maximum Output Current||10|
|Output Connections||(3) NEMA 5-15R
(3) NEMA 5-15R (selector_surgetitle)
typical : 12ms maximum
|Nominal Input Voltage||120V|
|Input frequency||50/60 Hz +/- 3 Hz (auto sensing)|
|Input Connections||NEMA 5-15P|
|Cord Length||6ft (1.83meters)|
|Input voltage range for main operations||98 - 140V|
|Number of Power Cords||1|
|Batteries & Runtime|
|Battery type||Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof|
|Typical recharge time||8hour(s)|
|Expected Battery Life||4 - 6 Year|
|Number of Battery||1|
|Battery Capacity||106 Volt-Amp-Hour|
|Runtime||3 min. @ 100% load (300W)|
|Efficiency||99.0% @ 100% load (300W)|
|Communications & Management|
|Interface Port(s)||Optional Simple Signalling RS232 cable
|Control panel||LED status display with On Line
On Battery : Replace Battery and Overload indicators
|Audible Alarm||Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm|
|Surge Protection and Filtering|
|Surge energy rating||480Joules|
|Data Line Protection||Analog phone line for phone/fax/modem/DSL (RJ-11 connector)|
|Filtering||Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449|
|Temperatures||Operating: 0 - 40 °C
Storage: -15 - 45 °C
|Humidity||Operating: 0 - 95 %
Storage: 0 - 95 %
|Elevation||Operating: 0 - 3000 meters
Storage: 0 - 15000 meters
|Audible noise||45.0dBA (at 1 meter from surface of unit)|
|Online thermal dissipation||24.0BTU/hr|
|Approvals||cUL Listed, California (CEC) Battery Charger, ENERGY STAR (USA), FCC Part 15 Class B, Industry Canada, UL 1778|
|Equipment protection policy||Lifetime : $100000|
|Standard warranty||3 years repair or replace|
|Dimensions & Weight|
|Dimensions||Maximum Height: 165mm
Maximum Width: 91mm
Maximum Depth: 284mm