Lian Li LANCOOL 216 RX Case, Black w/ Tempered Glass Side Window, Dual Front 160mm ARGB Fans, Rear 140mm Fan
Product Info
Lian Li LANCOOL 216 RX ATX Gaming Case, Black
w/ 2x Front 160mm ARGB Fans, 1x Rear 140mm Fan
The LANCOOL 216 RX Is Airflow Focused!
The LANCOOL 216 Series are mainstream cases that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling.
The LANCOOL 216 RX comes pre-installed with 2x Front 160mm ARGB Fans and a 140mm Rear PWM Fans, and an innovative rear PCIe fan bracket to maximize airflow.
- Mid-tower ATX Chassis configurable for Air and / or Water Cooling
- Airflow optimized with Mesh Panels at the Front, Top and on the Power Supply Shroud
- 2x Front 160mm Dual Channel ARGB PWM Fans; Static Pressure: 3.1mm H2O, Airflow: 118 CFM
- 1x Rear 140mm PWM Fan; 2.4mm H2O, Airflow: 81 CFM
- Supports 360mm Radiator at the Top or Front with up to 10 Fans
- Includes Rear PCIe Fan bracket
- Supports up to 6x non-M.2 Storage Devices
- Front I/O Panel can be relocated to the Bottom
- Extensive Cable Management Solution
Features
LANCOOL 216 160mm ARGB FANS
The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional RGB FAN Controller. You can also attached the Cablies to the motherboard lighting software by connecting them directly to your Motherboard's 5V 3-pin header.
Located in the second chamber behind the Motherboard, you will find the included SATA Powered RGB LED Hub supports up to 4x ARGB PWM Fans which saves you time and money down the road.
FRONT I/O CAN BE RELOCATED
Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.
CONTINUOUS FRONT TO TOP MESH
To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh panel.
* Note: The mesh panel beside the PSU shroud chamber is removable but is also an integral part of the support mechanism for the side tempered glass panel. Remove with care!
AIR COOLING MODE / WATER COOLING MODE
The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.
AIR COOLING
Set higher, the motherboard leaves room above the PSU shroud for wider fans and a cooler running PC.
WATER COOLING
Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.
REMOVEABLE TOP RADIATOR BRACKET
The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.
LATEST GEN GPU READY
With enough room for graphics cards up to 392mm in length, and 180mm in height (air cooling mode), the LANCOOL 216 is compatible with even the largest Modern AMD and NVidia Graphics Cards.
HARDWARE COMPATIBILITY
The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.
PRESSURE LEAK FREE
Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator / 3x 120mm fans at the top.
VERTICAL GPU COMPATIBLE
The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required.
STORAGE
UP TO 6x SSD + 2x HDD STORAGE CAPACITY
A total of 2x 3.5 inch + 6x 2.5inch drives can be installed with dedicated mounts for storage.
CABLE MANAGEMENT
The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.
PCIE FAN BRACKET
The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.
Additional Information:
Specifications
| Product | Lian Li LANCOOL 216 RX E-ATX Gaming Case, Black |
|---|---|
| Part Number | LANCOOL 216RX |
| Color | Black |
| Chassis Type | Full Tower E-ATX Chassis |
| Front Design | Mesh |
| Material | Chassis: Steel Glass Side Panel: 4.0mm Tempered Glass |
| Motherboard | E-ATX* / ATX / M-ATX / Mini-ITX *E-ATX Boards under 280mm Wide |
| Expansion Slots | 7 |
| Drive Bays | Drive Cage：2x 2.5" SSD + 2x 3.5" HDD PSU Cover：2x 2.5" SSD Behind MB Tray: 2x 2.5" SSD |
| GPU Length | Up to 392mm |
| Maximum CPU Cooler Height | 180.5mm |
| Maximum ATX PSU Length | Up to 220mm |
| Fan Mount Locations | Top: 3x 120mm / 2x 140mm Fans PSU Cover: 2x 120mm / 2x 140mm (Air Cooling mode) Fans Front: 3x 120mm / 2x 140mm / 2x 160mm Fans Rear: 1x 120mm / 1x 140mm Fan PCIe Fan Bracket: 1x 120mm Fan |
| Included Fans | 2x Front 160mm Dual Channel ARGB PWM Fans: Static Pressure: 3.1mm H2O per Fan Airflow: 118 CFM per Fan 1x Rear 140mm PWM Fan: |
| Dust Filters | 1x Bottom Dust Filter |
| Radiator Support | Front: 360 / 280 / 240mm Top: 360 / 280 / 240mm Bottom: 240mm |
| I/O Panel | 1x USB 3.0 Type-C port 2x USB 3.0 Type-A ports 1x 3.5mm Combo Audio jack 1x Power Button |
| Cable Management | Yes |
| Power Supply | PS2 ATX PSU (not included) |
| Dimensions (LxWxH) | 478 x 229 x 494mm |
| Weight | N/A |
