Dual Port USB 3.2 Gen 2 Type-A PCIe Expansion Card
Product Info
QNAP Dual Port USB 3.2 Gen 2 Type-A PCIe Expansion Card
Up to 10Gbps Transfer Speeds for Faster File Transfers and Storage Expansion
The QNAP USB 3.2 Gen 2 Expansion Card provides transfer speeds of up to 10Gbps; double that of USB 3.2 Gen 1 ports, to greatly boost data transfer speeds. With two ports, the QNAP USB 3.2 Gen 2 Expansion Card provides compatibility with newer, faster USB 3.2 Gen 2 devices to accelerate file transfers and backup. The QNAP USB 3.2 Gen 2 Expansion Card can be installed in QNAP NAS Boxes and Windows® or Ubuntu® PCs.
- Dual-port USB 3.2 Gen 2 Type-A connectivity. Both ports provide up to 10 Gbps data transfer speeds and are backwards compatible with previous-generation USB devices
- Supports USB Attached SCSI Protocol (UASP) to provide convenient fast file sharing and intensive data transfer
- Uses advanced low-power processes, following standard PCIe/USB bus Power Management to reduce power consumption
- Supports overcurrent detection and short circuit protection
- Supports Windows 8.x / 10 (32/64-bit) and Ubuntu desktop 20.04 LTS. No driver is required
Features
Experience USB 3.2 Gen 2 SuperSpeed+ Data Transfers up to 10Gbps
The QNAP USB 3.2 Gen 2 Expansion Card provides speeds of up to 10Gbps – twice as fast as USB 3.2 Gen 1 ports, and 20x as fast as USB 2.0 ports.
Expand your Storage by Connecting to a QNAP USB JBOD
By using a QNAP USB 3.2 Gen 2 Expansion Card in your QNAP NAS or PC, you can connect a QNAP USB JBOD to back up and expand your storage. The USB 3.2 Gen 2 Expansion Card supports both QNAP NAS and Windows®/Ubuntu® PCs without requiring drivers. You can configure RAID and monitor disk health using the QTS/QuTS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on your computer.
NAS Expansion:
Install the QNAP USB 3.2 Gen 2 Expansion Card and connect to a QNAP USB JBOD device, adding additional storage capacity with up to 10Gbps transmission speeds.
PC Expansion:
Install the QNAP USB 3.2 Gen 2 Expansion Card and connect to a QNAP USB JBOD device to take advantage of a 10Gbps DAS solution.
Specifications
Make and Model | QNAP Dual Port USB 3.2 Gen 2 Type-A PCIe Expansion Card |
---|---|
Part Number | QXP-10G2U3A |
Connector Type | 2x USB 3.2 Gen 2 (10 Gbps) Type-A Ports |
Data Rate | Up to 10 Gbps |
Controller | ASMedia ASM3142 |
Card Connector | PCIe 2.0 x2 |
Card Brackets | Low-profile Bracket (pre-installed) Full-height Bracket QNAP specific NAS Bracket |
Form Factor | Single Slot Width |
Environmentals | Temperature: Operating: 0 ~ 40° C (32 ~ 104° F) Humidity: |
Dimensions | 89.65 x 68.90 x 14.00mm |
Weight | N/A |