airMAX® PowerBeam AC 2.4 GHz, 400mm Bridge
2.4 GHz Wi-Fi antenna with a 450+ Mbps Real TCP/IP throughput rate and a 400 mm transmission range
Ubiquiti launches the latest generation of airMAX® CPE (Customer Premises Equipment), the PowerBeam® 2AC, with dedicated Wi-Fi management. The PowerBeam® 2AC directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam® 2AC blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
- Highly efficient antenna beam performance
- Custom Ubiquiti® airMAX® ac processor
- Up to 450+ Mbps real TCP/IP throughput
- Innovative snap and lock assembly
- Proprietary InnerFeed™ Technology
Improved Noise Immunity
The PowerBeam 2AC directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam 2AC blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Ubiquiti's InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Featuring high performance and innovative design, the PowerBeam 2AC is versatile and cost-effective to deploy.
airMAX® ac Technology
Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
The next-generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
airMAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX.
With their use of proprietary airMAX ac technology, 2.4 GHz airMAX ac products support up to 330+ Mbps real TCP/IP throughput – more than double the throughput of standard airMAX products.
|Product||airMAX PowerBeam AC 2.4 GHz Wi-Fi Antenna, 400mm Bridge|
|Enclosure||Outdoor UV stabilized plastic|
|Networking Interface||1 x 10/100/1000 Ethernet port|
|Wind Survivability||200 km/h (125 mph)|
|Wind Loading||342.5 N @ 200 km/h
(77 lbf @ 125 mph)
|Power Consumption||7.5W max.|
|Power Supply||24V, 0.5A Gigabit PoE Adapter (Included)|
|Power Method||Passive PoE (Pairs 4,5+;7,8 Return)|
|Shock and Vibrations||ETSI300-019-1.4|
|Mounting||Pole mounting kit Included|
|Operating Temperature||-40 to 70 °C (-40 to 158 °F)|
|Operating Humidity||5 to 95% Noncondensing|
|Certifications||CE, FCC, IC|
|Dimensions||420 x 420 x 289 mm (16.54" x 16.54" x 11.38")|
|Weight||1.8kg (3.96 lbs.)|
- Ubiquiti airMAX PowerBeam AC 2.4GHz Wi-Fi Wireless Antenna Bridge
- Antenna Feed
- Rear Housing
- Adjustment Bracket
- Mounting Bracket
- Hex Bolts
- Pole Clamp
- Carriage Bolts
- Flange Nuts
- Gigabit PoE w/ Mounting Bracket
- Power Cord
- Quick Start Guide