TL-D800C 8-Bay NAS Storage Enclosure
Product Info
TL-D800C (USB) USB 3.2 Gen2 Type-C high-capacity JBOD Storage Enclosure
The TL-D800C JBOD storage enclosure allows you to back up and expand your QNAP NAS. The TL-D800C features eight 3.5-inch SATA 6Gb/s drive bays with USB 3.2 Gen2 (10 Gbps) Type-C connectivity to provide a fast and smooth expansion solution.
- USB 3.2 Gen2 Type-C connectivity* provides up to 10 Gb/s data transfer speeds. The port can support USB Type-A to Type-C connection or Thunderbolt 3 Type-C connection using different cables.
- Lockable hard drive trays prevent accidental drive removal.
- Supports SATA 6Gb/s drives for reliable read/write performance.
1. TL-D800C only supports devices with USB 3.2 Gen1 (or above) port.
2. QNAP recommends following the standard procedure to connect or disconnect the TL-D800C. For more information, please see the TL-D800C user manual.
3. The TL-D800C can only be used as an individual storage pool or volume on the NAS. Its storage pool/volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D800C.
4. The TL-D800C only supports QNAP NAS running on QTS 4.4.2 (or above) or QTS hero operating system.
5. The TL-D800C doesn’t support ASM1142 USB controller IC based USB ports and PCIe expansion cards (e.g. QNAP USB-U31A2P01 expansion card).
Features
High-speed USB Transfer
The TL-D800C features high-speed USB 3.2 Gen2 Type-C connectivity and built-in USB Attached SCSI Protocol (UASP) to provide convenient fast file sharing and intensive data transfer. The TL-D800C not only provides you higher file transfer performance than USB 3.2 Gen1 (USB 3.2 Gen 1) but offers a more cost-effective option than other storage enclosures on the market.
Note: To achieve UASP, please make sure that your computers and hosts support it. Tested in QNAP Labs. Figures may vary by environment.
Flexible Storage Configuration and Management
The TL-D800C provides software-controlled configurations for greater management flexibility. Users can use the QTS / QuTS hero Storage & Snapshots Manager to configure the TL-D800C as a storage enclosure for your QNAP NAS. The NAS expansion storage mode supports various NAS functions, including storage pools and snapshots. With TL-D800C, you can easily expand storage capacity.
Learn more: Storage & Snapshots
JBOD Migration Speeds Up Remote File Transfers
Migrating a large number of small files or a single large data file by network environment can be time-consuming and consume significant network bandwidth that causes decreased work efficiency. The TL-D800C supports remote file transfer. All you have to do is set up the RAID configuration and store a large number of files. Then you can move the TL-D800C to another place and connect it with the NAS to experience the device’s simple plug and play feature and fast data migration.
Note: If you have set up the software RAID configuration, the TL-D800C migration only supports hosts running on the same operating system.
Use TL-D800C as a High-capacity Disk Drive Reader by Setting Up Single Disk Mode
You can treat each disk in your TL-D800C as an individual storage space, and also use it as a removable drive. It can function like a high-capacity disk drive reader. When one of disk reaches data storage limitation, you can remove it and put it into a dry box. Then swap a different disk into theTL-D800C empty drive slot. After that, you can install the disk that reached full data capacity into the TL-D800C and connect it with a NAS for direct file access.
Note: The operating system of the destination host should support the drive file system for file access. For example, NTFS (for Windows), HFS+ (for Mac), EXT4 (for Ubuntu or QNAP NAS), exFAT (for Windows, Mac, Ubuntu, and QNAP NAS) etc.
Extend Hardware Warranty X Multi-hour Burn-in
The TL-D800C undergoes rigorous multi-hour burn-in to ensures your TL-D800C is immediately ready for demanding use, and it is backed by a 2-year warranty at no additional costs. You can purchase a warranty extension that extends your warranty coverage up to 5 years.
Learn more: QNAP warranty services
Additional Information:
Requirements
- Supported OS:
- QNAP QTS / QuTS hero, Windows®, Mac, Linux
- QTS 4.4.2 / QuTS hero h4.5.0 (or newer)
Specifications
Product | 8-Bay Storage Enclosure |
---|---|
Model Number | TL-D800C-US |
Processor | N/A |
System Memory | N/A |
Graphics | N/A |
Drive Bays | 8 |
Hard Drive Type | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
Hot-swappable | N/A |
QTS QTS Drive Monitoring and Storage Pool Support | Yes |
QTS Advanced Drive features such as Bad Block Scan, Erase, Performance Test, Seagate Ironwolf IHM | Yes |
RAID Migrated & Expanded | Yes |
Qtier on Enclosure | Yes |
Utility for Other Platform | QNAP JBOD Manager |
Host Interface | 1 x USB 3.2 Gen 2 Type-C |
LAN Port | N/A |
HDMI Output | N/A |
10GbE Slot | N/A |
PCIe Slot | N/A |
Audio | N/A |
LED Indicators | HDD 1-8, Status, Link, Fan error |
Buttons | Power switch |
Display | N/A |
IR Sensor | N/A |
Power Supply | 250W PSU, 100~240V |
Power Consumption (W) | In operation: 48.4W (typical) |
Cooling | 2 x 120mm fans, 12VDC |
Sound Level | 26.2 dBA |
Temperature | Operating: 0~40 °C (32~104 °F) |
Humidity | 5~95% RH non-condensing Wet bulb: 27°C (80.6°F) |
Form Factor | Tower |
Dimensions (WxHxD) | 329.3 x 188.2 x 281.4 mm |
Weight | 6.18kg |
Package Contents
- QNAP TL-800C-US 8-Bay Storage Enclosure
- Power Cord
- 1 x USB Type-C to Type-A Connector Cable
- 24 x Flat Head Screws (For 3.5" HDD Drives)
- 32 x Flat Head Screws (For 2.5" HDD Drives)
- 1 x USB Cable Clip
- 2 x Hard Disk Tray Keys
- Quick Installation Guide