The F12 120mm PWM Fan Is Pressure Optimized
Optimized for Static Pressure
During the development of the new F12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the F12 PWM is particularly suitable for use on heatsinks and radiators.
High Quality Fluid Dynamic Bearing
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
Perfect Case Fan Regulation with PWM
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimizing the noise level yet delivering the desired airflow and pressure.
Two Way Installation
10 Year Manufacturer Warranty with Extended Life Span
The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, Arctic has extended the warranty to 10 years!
PWM Fan Speeds from 230 ~ 1350 RPM
Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
|Make and Model||Arctic F12 120mm PWM Fan, Black|
|Fan Size||120mm Case Fan|
|Bearing Type||FDB (Fluid Dynamic Bearing)|
|Speed||PWM: 230 ~ 1,350 RPM|
|Air Flow||53 CFM / 90.1m3/hour|
|Noise||0.3 Sone / <24.5dB(A)|
|Power||Operating: 12Vdc @ 0.24A
Start Up Voltage: 6Vdc
|Connector||4-Pin fan connector|
|Dimensions||120 x 120 x 25mm|
- Arctic Cooling F12 PWM 120mm Case Fan, Black
- 4 x Screws
- User's Information