Product - Zalman CNPS7500-Cu LED Ultra Quiet CPU Cooler

The new CNPS 7500 series continues the success of the CNPS7000 and CNPS7700. The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance.

• Does not generate noise or vibration in Silent Mode.
• Pure copper base materials ensure excellent heat dissipation.
• Compatible with all single and dual core CPUs for Intel Socket 775/478 and AMD Sockets AM2/754/939/940
• The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance.
• The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.

Socket CPU CPU Compatibility Intel 478 Celeron Supports all speeds Celeron D Pentium 4 775 Celeron D Supports all speeds Pentium 4 Pentium D Core 2 Duo AMD AM2 Sempron Supports all speeds Athlon 64 Athlon 64 X2 Athlon 64 FX 754 Sempron Supports all speeds Athlon 64 939 Athlon 64 Supports all speeds Athlon 64 X2 Athlon 64 FX Opteron Dual-Core Opteron 940 Athlon 64 FX Supports all speeds Opteron Dual-Core Opteron

Notices for Intel 478 socket based CPU installation
1) As shown in Figure 2, a motherboard that is not compliant with the "10.2mm motherboard component height restriction" standard, introduced by Intel, may create interference between components and the clip of CNPS7500 LED. Please do not install the CNPS7500 LED if this interference is observed. 2) No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
Notices for Intel 775 socket based CPU installation
	No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
Notices for AMD AM2/754/939/940 socket based CPU installation
	No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU. AMD sockets require Stock Retention Frame.

FHS
Materials	Pure Copper
Dissipation Area	3,500cm2
Dimensions	121(L) X 121(W) X 67(H) mm
Weight	848 g
Fan
Bearing Type	2 Ball-Bearing
Speed	1,150rpm ± 10% ~ 2,300rpm ± 10% The fan operates at 2,550rpm (34.5dBA) if directly connected to the motherboard’s power connector without the use of Fan Mate 2
Noise Level	17dBA ± 10% ~ 32dBA ± 10% Measured 1m distance away from source
FAN Speed Controller (FAN MATE 2)
Output Voltage	5V ~ 11V ± 2%
Allowable Power	6W or lower
Connector	3-Pin
Dimensions	70(L) x 26(W) x 26(H)mm
Weight	20g

Common Components
1) Cooler (CNPS7500-Cu LED)
2) Thermal Grease
3) Fan Speed Controller (FAN MATE 2)
4) Double-sided Tape (for FAN MATE 2 attachment)
5) Cable for FAN MATE 2
6) User’s Manual (in English and Korean)

Components for Intel Socket 775
7) One (1) Clip Support for Socket 775
8) One (1) Backplate for Socket 775
9) Four (4) Clip Support Fixing Bolts
10) One (1) Clip Lever

Componentsfor Intel Socket 478
11) One pair of Clip Supports for Socket 478
* Component 10)

Component for AMD Socket AM2/754/939/940
* Component 10)