Product - ANTEC TruePower Trio 430W Power Supply w/ Triple +12V

One, Two, Trio!

The new generation of power supplies has arrived with Antec’s TruePower Trio series. The three +12V rails allow you to distribute your power more evenly, which will result in a more stable system. Available in three models: 430 Watt, 550 Watt and a 650 Watt that gives you serious power for even the most cutting edge components. TruePower Trio perfectly handles dual processors, dual graphics cards, and just about anything else you can throw at it.

- Universal Input, automatically adjusts for 100V to 240V power grids
- Active Power Factor Correction (PFC) for environmentally friendlier power
- Three 12V output circuits provide added system stability
- Accurate power rating allows TruePower Trio to deliver its full rated power, 24 hours a day rated at 50 C
- Up to 85% efficiency
- 120mm low noise cooling fan
- Fan Only power connectors allow TruePower Trio to control case fan speeds, reducing total system noise
- Dedicated outputs for stable output and less ripple noise
- Feedback loop circuits for tighter load regulation ( 3%) to maintain accurate voltage to all components
- Heavy duty protection circuitry prevents damage resulting from short circuits (SCP), power overloads (OPP), over voltages (OVP), and under voltages (UVP)
- 4 SATA connectors for Serial ATA drives
- Two PCI-E connectors for PCI-Express video cards on 550W and 650W models, one connector on 430W model
- MTBF: 80,000 hours at 25 C
- Safety approvals: UL, CUL, FCC, T V, CE, C-tick, CCC, CB
- Power Factor value up to 99%
- Gold plated connectors for superior conductivity
- AQ5 - 5 year warranty

Maximum Power: 430 Watts
Switches:
- ATX Logic on-off
- additional power rocker switch
Special Connectors:
- ATX12V
- 3-pin Fan Sensor
- Fan Only
- SATA
Transient Response: +5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
P. G. Signal: 100-500ms
Over Voltage Protection recycle AC to reset:
- +5V trip point < +6.5V
- +3.3V trip point < +4.1V
- +12V trip point < +14.4V
Leakage Current: < 3.5mA @ 115VAC

INPUT
Input Voltage: 115 VAC / 230VAC
Input Frequency Range: 47Hz to 63Hz
Input Surge Current: < 60A @ 115VAC
Input Current:
- 7A for 115VAC
- 3.5A for 230VAC
Hold-up Time: > 17ms at Full Load
Efficiency: up to 85%
EMI/RFI:
- FCC Class B
- CISPR22 Class

OUTPUT
Output : Max. Load / Min. Load / Load Reg. / Ripple V(p-p)
+3.3V : 22A* / 0.5A / 3% / 50mV
+5V : 15A* / 0.5A / 3% / 50mV
+12V1 : 16A* / 1A / 3% / 120mV
+12V2 : 16A / 1A / 3% / 120mV
+12V3 : 16A / 1A / 3% / 120mV
+5V SB : 3.0A / 0A / 3% / 50mV
-12V : 0.8A / 0A / 6% / 120mV
* +12V1, 12V2,12V3 maximum output 384 Watts max.

ENVIRONMENTAL
Operating Temp.: 0 to 50℃
Operating Alt.: Sea Level 10,000 ft.
Non-Operating Vibration
- Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
- Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
MTBF: 80,000 hrs. @ 25 ℃
Approvals: UL, CUL, FCC Class B, CB, T V

5 year warranty