Product Info
The ATX-400PN is a High efficiency and reliable ATX12V power supply. It complies with the ATX12V 2.0 standard and includes PCI-E and SATA connectors. Other features includes a large 120mm fan with Noise Killer for ultra quiet operation.
Features
- Complied with ATX12V 2.0 standard
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and - CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
Specifications
Input Range: 100~132Vrms or 200~264Vrms, Manual selection
Frequency: 47~63Hz
Input Current: 8.5A (RMS) @115Vrms/60Hz, 5A (RMS) @ 230Vrms/50Hz
Inrush Current: 100A Max cold start, 120A Max warm start measured at 264Vrms/50Hz
Output:
Output Current rating Input Voltage
+3.3V: 30.0A
+5V: 28.0A
+12V1: 18.0A
+12V2: 18.0A
-5V: N/A
-12V: 0.5A
+5Vsb: 2.0A
+5 & +3.3V: 150W Max
+12V1 & +12V2: 348W Max
*+3.3V, +5V, +12V1 & +12V2DC: 385W Max
Total Output: 400W
Temperature Range: Operating 0 C ~ +25 C on full load; De-rate 2W/ C from +25 C to +50 C.
Storage & shipping -20 C ~ +65 C
• Humidity: 90% on operating and 95% on storage
• Dielectric Withstand: Input to frame ground 1800V AC for 1 second
• Efficiency: 70% minimum measured at nominal AC main voltage and frequency with maximum loads on all outputs
• Rise Time: Less than 20ms on all outputs
• Hold-up Time: 17ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Not exceed 3.5mA
• MTBF: 100,000 hours on maximum load at +25 C
• Dimension (WxHxL): 150x86x140mm / 6x3.4x5.5inches