Antec's HCP-750 unifies raw power with advanced PSU engineering to meet the demands of high performing PCs. A full-featured, 80 PLUS® Gold certified unit, HCP-750 is capable of outputting 100 percent of its rated power on its four +12V rails to ensure CPU and graphics card compatibility.
Exclusive to the High Current series, HCP-750 boasts High Current heavy-gauge 16 AWG wiring that boosts conductivity, increasing efficiency and improving power delivery. In addition, a double-layer PCB and onboard DC-to-DC converters provide substantial voltage stability.
To tackle the needs of your system, pick up Antec's HCP-750.
Standards and Features
The connectors and power specifications of the HCP-750 PSU are all compatible with ATX12V v2.3 and EPS12V v2.92 specifications. The HCP-750 features Universal Input, which automatically senses when you connect the power supply to any AC power source between 100 - 240V without setting a voltage switch.
This power supply also features Active Power Factor Correction (PFC), which improves the power factor value of the power supply by altering the input current wave shape, helping to power transmission across the grid.
A variety of industrial-grade safety circuitry will help protect your computer: Over Current Protection (OCP), Over Voltage Protection (OVP), Short Circuit Protection (SCP), Over Power Protection (OPP) and Over Temperature Protection (OTP). Sometimes the PSU will “latch” into a protected state. You will need to power off the PSU and clear the fault before it will function again. There are no user-replaceable fuses in your HCP-750.
Special Quiet Computing™ Pulse Width Modulation (PWM) Fan
A 135 mm double ball bearing PWM fan can spin much more slowly and be quieter than a voltage-controlled fan. The PSU uses a PWM fan that can spin as slow as 260 RPM or as fast as 2600 RPM, depending on load and ambient temperature. The PSU will vary the fan speed depending on the load of your computer and should be nearly inaudible when your computer is idling. The location of the PSU fan also helps to reduce the sound emitted by your computer.
80 Plus® Certification
80 PLUS® certification is the most widely recognized independent standard in power supply efficiency. An 80 PLUS® certified power supply uses less energy and generates less heat to stay cooler, run quieter and last longer. The HCP-750 has been 80 PLUS® Gold certified to be at least 87% efficient at a wide range of operating loads; this will lower your operating costs and help protect the environment.
NVIDIA™ SLI™ Ready and ATI CrossFireX™ Certified
Antec’s HCP-750 is NVIDIA™ SLI™ Ready and ATI CrossFireX™ certified for use with multiple high-end graphics cards for superior parallel graphics processing.
Intelligent Hybrid Cable Management
The HCP-750 uses Intelligent Hybrid Cable Management. Cables that are important or mandatory are permanently connected to the PSU for the highest quality power delivery. There are modular jacks on the back of the PSU to add additional cables as needed. Using only the cables you need will reduce clutter and improve airflow inside your case.
Modular Cable Jacks
There are three 5-pin black jacks and five 10-pin red jacks on the back of your HCP-750 PSU. These jacks are for the optional cables that come with your power supply. A modular 10-pin connector system allows you plug 5-pin connectors into the 10-pin jacks if you run out of 5-pin jacks.
+12 Volt Rail Distribution
The HCP-750 uses four separate +12 volt power rails. Different connectors are hooked up to separate circuits to aid in the balanced distribution of power between devices in your computer. The +12V rails have been assigned to different connectors to prevent voltage sags in one device due to sudden demands for power by another device.
Selected highlights of the Antec HCP-750 High Current Pro include:
|Input Voltage||100-240 Volts AC|
|Input Frequency Range||50 - 60 Hz|
|Input Current||12A max @ 100-120 Volts rms
6A max @ 200-240Volts rms
|Efficiency||up to 92%|
|Total Combined Output||750W|
|Cooling||135 mm double ball bearing PWM fan for optimal cooling|
|80 PLUS®||Yes, up to 92% efficient (80+ Gold certified)|
|Active PFC||Yes, .99 Active PFC|
|Protection||Over current protection (OCP)
Over voltage protection (OVP)
Short circuit protection (SCP)
Over power protection (OPP)
Over thermal protection (OTP)
80 PLUS™ Gold
ATX12V version 2.3
EPS version 2.92
Meets 2010 EUP Lot 6 requirement: 5Vsb < 1W
|Connectors||1 x Motherboard 24 pin (20 + 4)
1 x CPU 12 V ATX/EPS (4 + 4 pin)
4 x 8 pin (6+2) PCI-E
9 x SATA
6 x Molex Peripheral
1 x 4 pin Floppy
|Cable Construction||Special heavy-gauge 16 AWG High Current cable at CPU reduces conducted resistance, increasing efficiency and improving power delivery.
All cables braided and wrapped for better airflow and appearance.
|Safety Approvals||cUL, TÜV, CE, CB, FCC, C-TICK, CCC, BSMI, Gost-R|
|Dimensions / Weight|
|Dimensions||86 mm (H) x 150 mm (W) x 180 mm (D)
3.4" (H) x 5.9" (W) x 7.1" (D)
|Net Weight||2.5 kg (5.5 lb)|