This a high efficiency and reliable ATX12V power supply, which is in compliance with the ATX12V standard. Other features includes a large ball bearing fan with Noise Killer for ultra quiet operation, Nividia SLI ready, and ATI CrossFire Certified for ultimate graphics.

• Complied with EPS12V and ATX12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Compatible with European Union directive 2002/95/EC (Restriction on Hazardous Substances)
• Remote On/Off function
• Internal 12V DC fan included
• Noise Killer (Thermal fan speed control function)
• Low noise and ripple
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B and CISPR 22 Class B
• Approved by UL 60950, CSA C22.2, TUV or VDE, NEMKO (CB Report), IEC 60950, EN and CE

Temperature Range	Operating 0° C ~ 40° C on full load De-rate 5W/C from 40° C to 50° C Storage & shipping -20° C ~ 80° C
Humidity	5~95% on operating and storage
Dielectric Withstand	Input to frame ground 1800V AC for 1 second
Efficiency	80% min on 230AC/50Hz & 78% min on 115VAC/60Hz at full load
Rise Time	Less than 20ms
Hold-up Time	17ms minimum at nominal input voltage
Power Good Signal	Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current	Less than 3.5mA at 115VAC/60Hz
MTBF	100,000 hours on maximum load at +25° C
Dimensions (WxHxL)	150 x 86 x 140 mm 6 x 3.4 x 5.5 inches
Input
Range	90~264VAC, Full Range Input
Frequency	47~63Hz
Input Current	7.5A (RMS) @ 115VAC, 3.6A (RMS) @ 230VAC
Inrush Current	No damage, typical 100A Max at cold start

Output Voltage	Min Load	Normal Load	Max Load	Load Reg.	Line Reg.	Ripple	Ripple & Noise
+3.3V	0.8A	18A	36A	± 5%	± 1%	50mV P-P	100mV P-P
+5V	0.5A	15A	30A	± 5%	± 1%	50mV P-P	100mV P-P
+12V1	0A	7.5A	15A	± 5%	± 1%	120mV P-P	200mV P-P
+12V2	0A	7.5A	15A	± 5%	± 1%	120mV P-P	200mV P-P
+12V3	0.9A	7.5A	15A	± 5%	± 1%	120mV P-P	200mV P-P
+12V4	0.1A	7.5A	15A	± 5%	± 1%	120mV P-P	200mV P-P
-12V	0.0A	0.25A	0.8A	± 10%	± 2%	120mV P-P	200mV P-P
+5Vsb	0.0A	1.0A	2.0 A	± 5%	± 1%	50mV P-P	100mV P-P