EarthWatts, the most environmentally friendly Power Supply yet.

Do your part for the environment with EarthWatts power supplies. The earth is our most valuable resource and protecting and preserving it for future generations is of utmost importance. EarthWatts is available in three highly efficient models—380 Watt, 430 Watt, and 500 Watt—and are all 80 PLUS® certified, the newest standard in power supply efficiency. And that means that using EarthWatts will save you money on your electrical bill. Fully equipped with universal input, EarthWatts automatically works on any power grid in the world. And the built-in Active PFC makes EarthWatts the ideal way to reduce electrical waste and protect the environment.

- 80mm low noise cooling fan
- Dual 12V outputs: 12V2 for Motherboard and peripherals; 12V1 for processor
- Industrial-grade protection circuitry prevents damage resulting from short circuits, power overloads, over voltage, and under voltage
- 80 PLUS® certified
- 4 SATA connectors
- PCI-E connector: one for 380W and 430W, two for 500W
- Safety approvals: UL, CUL, FCC, T V, CE, CB, C-tick, CCC
- Universal input
- Active Power Factor Correction (PFC)
- PF value up to 99%
- AQ3 Antec Quality three-year parts and labor warranty

Maximum Power: 500 Watts
Switches:
- ATX Logic on-off
- Additional power rocker switch
- 115/230 volt selector switch
Special Connectors:
- ATX12V
- 3-pin Fan Sensor
- SATA
Transient Response: +5V, +12V and 3.3V outputs return to within 5% in less than 1ms for 20% load change.
P. G. Signal: 100-500ms
Over Voltage Protection recycle AC to reset:
+5V trip point < +6.2V
+3.3V trip point < +4.1V
+12V trip point < +14.3V

INPUT
Input Voltage: 115VAC/230VAC
Input Frequency Range: 60Hz/50Hz
Input Surge Current: < 60A @ 115VAC/< 80A @ 230V
Input Current: 12A for 115VAC / 6A for 230VAC
Hold-up Time: > 20ms at Full Load
Efficiency: up to 85%
EMI/RFI: FCC Class B

OUTPUT
Voltage: Max. Load / Min. Load / Load Reg. / Ripple V(p-p)
+3.3V: 20A / 0.5A / 3% / 50mV
+5V: 20A / 0.3A / 3% / 50mV
+12V1: 17A / 1A / 3% / 120mV
+12V2: 17A / 1A / 3% / 120mV
+5V SB: 2.5A / 0A / 5% / 50mV
-12V: 0.8A / 0A / 5% / 120mV
* Total: +12V output: 34A
* +5V and +3.3V combined output: 34.2A

ENVIRONMENTAL
Operating Temp.: 0 to 50 C
Operating Alt.: Sea Level 10,000 ft.
Non-Operating Vibration:
- Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
- Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
MTBF: 80,000 hrs. @ 25 C
Approvals: UL, CUL, FCC Class B, CB, T V, C-Tick, CCC

DIMENSIONS
Unit Size:
- 5.9"(W) x 3.4"(H) x 6.1"(D)
- 14.9cm (W)x 8.5cm (H) x 15.8cm (D)
Weight: 5lbs.; 2.3kg

AQ3 Antec Quality three-year parts and labor warranty